Machine shed?

[joea99]

I need to get my machines under cover. Plans for garages, pole barns and the like face many obstacles.

So, I was thinking, for now, of a "car port" deal, even if open on all sides, This is made more attractive by the fact the town does not require permits for "detached" buildings of under 144 sq ft. So I could put up a free standing (or two) 10x14 "pole supported roofs" with a packed stone base.I really just want to keep them out of the sun and rain.

Thinking as simple as possible, with probably some kind of steel roof. Looking for ideas, such as where to get smaller quantities of roof material (26 ga. minimum?), to pour concrete "piles" for the upright supports, or just direct bury, and like that.

 

[Fuddy1952]

I wish you were close to Virginia. I have lots of steel roofing I could give you.

 

[gstrom99]

Those "car ports" are decent, and cheap. I'd be worried of them blowing away, in a real good wind storm.

 

[TMGT]

I wish you were close to Virginia. I have lots of steel roofing I could give you.

I'm in VA!

Sent from my SM-G715U1 using TractorByNet mobile app

 

[Fuddy1952]

I'm in VA!

Sent from my SM-G715U1 using TractorByNet mobile app

If you need steel panels let me know. I'll help load...free. Anyone need free firewood cut to 16" also? I'm in S. Central Va.

 

[TMGT]

I do need to build a tractor shed as my L is too tall with the canopy on to fit in the old lean too.

I'm in the Fredericksburg area so I guess it depends on what you consider s. central lol

Sent from my SM-G715U1 using TractorByNet mobile app

 

[Fuddy1952]

I believe japody will get it.

 

[TMGT]

Well if not let me know

Sent from my SM-G715U1 using TractorByNet mobile app

 

[Fuddy1952]

Well if not let me know

Sent from my SM-G715U1 using TractorByNet mobile app

I will...

 

[WranglerX]

Have you thought about something like found at link below...

https://www.versatube.com