M9540 with M35 loader, hose information

[fordstick]

My M35 loader rubbed a hole in the hose on the upper right hydraulic cylinder for the bucket curl. Can’t get a custom hose made because one end of the hose is proprietary (uses a red plastic circlip to hold the connector! Anyone have a part number for this hose?

 

[big bubba]

close to a dealer?

 

[ptsg]

Can you share a picture of that hose? Specifically that fitting?

Anyways, here is the manual for the loader with all the part numbers: https://www.millerloader.com/includes/manuals/loaders/M35.pdf

 

[fordstick]

Wow, the M35 in your manual looks very different from mine. I don't have any steel lines on my M35 at all. Anyway, on further inspection, the so called non-standard connector had a number stamped on it: 9031142. Google has it as a New Holland 9032604 (which supersedes 9031142). The picture of the New Holland part matches the hose too.

 

[ptsg]

Wow, the M35 in your manual looks very different from mine. I don't have any steel lines on my M35 at all. Anyway, on further inspection, the so called non-standard connector had a number stamped on it: 9031142. Google has it as a New Holland 9032604 (which supersedes 9031142). The picture of the New Holland part matches the hose too.View attachment 785649View attachment 785650View attachment 785651

Ok, disregard the manual I posted. I Googled M35 loader and the only one that came up with that name was the M35 loader made by Miller Loaders. Definitely not the same loader as yours.

That's indeed a special fitting. Looks like a swivel joint that allows the hose to swivel easily under pressure. A really bad choice as far as serviceability goes, in my opinion.

Hopefully you can find a replacement for it.