Drewintoledo
Bronze Member
LS spreading used asphalt
- Thread starter Drewintoledo
- Start date
- Views: 3155
LS Tractor Owner
Super Member
- Joined
- May 1, 2017
- Messages
- 7,665
- Location
- Edgewood, NM
- Tractor
- LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
Nice job! Looks like you definitely have some experience using a box blade for sure!
OP
Drewintoledo
Bronze Member
None really at all! I’ve used it on my septic to smooth the dirt but that was only a few passes. Thanks for the comment my head just expanded a bit! Ha
JCoastie
Platinum Member
Turned out really nice. Maybe a landscape rake on an angle to take the top down and push the asphalt to raise the sides.
OP
Drewintoledo
Bronze Member
Thank you. I’m always looking for an excuse to pick up another implement! What’s a tractor without implements anyway?
Mrsig
Gold Member
It turned out great! Thanks for sharing.
fried1765
Super Star Member
- Joined
- Jan 6, 2015
- Messages
- 10,159
- Tractor
- Kubota L48 TLB, Ford 1920 FEL, 8N Ford, Gravely 12 HP "Professional", 48" SCAG Liberty
Free asphalt millings is only a dream for me.Thank you. I’m always looking for an excuse to pick up another implement! What’s a tractor without implements anyway?
They go for a hefty price per ton here.
If you do a really nice grading job in the Spring, then the Summer sun will pack those millings together to make a really hard, relatively smooth, surface.
An EA rear Deluxe Scrape Blade would be a nice tool to also have.
workinonit
Elite Member
Looks good. I spread 50 Tri-axle loads of that on my driveway with a homemade landplane type blade. That stuff has made a driveway base that has stood the test of time. My drive was at least 8" thick everywhere and I have since had hot reclaimed asphalt laid over what I initially put down. My drive is 2000' and 14' wide.
Cycledude
Veteran Member
- Joined
- Nov 26, 2020
- Messages
- 1,636
- Location
- Rib Lake Wisconsin
- Tractor
- LS XR4155, Ford 6610, Ford 8n
Hydraulic top link would make things easier
sodamo
Super Star Member
- Joined
- May 20, 2004
- Messages
- 18,515
- Location
- Big Island, HI
- Tractor
- Bobcat CT4545 LS XR4140H (Mine) BX2380 (wife’s)
Nice job 
Diggin It
Super Star Member
They won't even sell it here ... at all. They work it back into new product.
sodamo
Super Star Member
- Joined
- May 20, 2004
- Messages
- 18,515
- Location
- Big Island, HI
- Tractor
- Bobcat CT4545 LS XR4140H (Mine) BX2380 (wife’s)
The piles here all have signs not to take, but sure have lots of spots where it is missing. A neighbor owns wide spot on side of the road where a bunch was dumped. One weekend, a loader and dump truck repositioned entire pile to our easement road, leading to their house. Unfortunately I don’t think they managed more than about inch thick so hadn’t held up that well even after rolling. Looked great for couple ofmonths.
