Tiller lowest tiller setting

BrettW · Jan 9, 2005

Hi,
which holes on the 3pt arms will let my tiller dig the deepest?
can tell and tired of playing with it, thanks, brett

DK35vince · Jan 9, 2005

Tiller depth is usually set by adjusting the skid shoes on the tiller itself.

texastomtom · Jan 10, 2005

The only way that would make any difference is that if you have telescoping rock shafts. Making them longer would technically make them lower/closer to the ground when the rock shafts where down... But only very slightly. Actually I've never had telescoping links - they are mainly just for ease of connection - not to run in the extended mode... right ?

I always set my depth on the tiller its self. It has adjustable skids.

tom

JerryG · Jan 10, 2005

<font color="blue"> which holes on the 3pt arms will let my tiller dig the deepest? </font>
On the lift arm....The ones closest to the tractor and on some also the higher up holes.
On the lift rod....The hole closest to the bottom.

BrettW · Jan 10, 2005

vince,
sorry, I dont understand what you mean by skid shoes. Seems to me that my tiller is only limited in depth by how low the tractor arms will allow it to go, brett