Losing Pins

   / Losing Pins #1  

Charlie175

Gold Member
Joined
May 27, 2008
Messages
259
Location
Virginia
Tractor
Mahindra 2015 gear
Anyone else have trouble keeping the retaining pins on? I do custom BushHogging and loader work with my 2015 and it seems every time I end up losing some pin or another from the 3 point ball mounts, sway chains, or this weekend it was from the drawbar retaining pin and I almost lost the drawbar. I guess the vegetation just reaches up and grabs them.
 
   / Losing Pins #2  
You might try replacing them with bolt and lock nut. Kind of a pain if you switch implements a lot but for a mostly dedicated bush hog or drawbar it should work.
 
   / Losing Pins #3  
Anyone else have trouble keeping the retaining pins on? I do custom BushHogging and loader work with my 2015 and it seems every time I end up losing some pin or another from the 3 point ball mounts, sway chains, or this weekend it was from the drawbar retaining pin and I almost lost the drawbar. I guess the vegetation just reaches up and grabs them.

I purchase the black pins from Tractor Supply and they are stronger springs. the cheap gold color I have wondered it they don't pop out on there own .
Give them a try.
ken
 
   / Losing Pins #4  
i ENDED UP USING CINCH STRAPS ON PIN CLIPS.
 
   / Losing Pins
  • Thread Starter
#5  
Thanks guys! I will look over these options.

I kept buying the gold snaps since that is what the local hardware store carried.
 
   / Losing Pins #7  
If you want to go through the trouble get some wire leader (fishing line) and a crimping tool and make lanyards for your pins. Another choice is sash weight chain easy to bend, wire, zip tie, solder or weld to pins. Back when I was writing specifications for trucks any pin that could be remove was attached with some kind of lanyard.
 
   / Losing Pins #8  
I took the cheap approach & use paracord to "leash" mine...

Nick
 
   / Losing Pins #9  
I purchase the black pins from Tractor Supply and they are stronger springs.

The 99 cent black lynch pins at Tractor Supply have about three times the spring-circle tension of the zinc chromate/gold lynch pins.

This will be your simplest solution.
 
Last edited:
   / Losing Pins #10  
The gold ones I got from Agri Supply have very strong spring tension. They are actually a little hard to open and if you’re not careful they will pinch the sh*t out of you.
 

Tractor & Equipment Auctions

2016 Chevrolet Silverado 1500 Crew Cab Pickup Truck (A50323)
2016 Chevrolet...
2017 Ford F-550 Ext. Cab Valve Maintenance Vacuum Service Truck (A50323)
2017 Ford F-550...
2001 Subaru Outback AWD SUV (A51694)
2001 Subaru...
2008 Ford F-350 4x4 Crew Cab Pickup Truck (A50323)
2008 Ford F-350...
2013 Doyle Dry Fertilizer Tender Trailer - Kubota Diesel, 3 Stainless Compartments, Side Discharge (A52748)
2013 Doyle Dry...
HAY KING RENOVATOR (A52472)
HAY KING RENOVATOR...
 
Top