I have a 2008 branson 2910i with the BL10S loader. I'm looking for seals for the hydraulic cylinders. No luck with local dealers and a friend checked with hercules seals but they didn't have them all. Any other suggestions appreciated.
Harry in Ky
Veteran Member
I've never been to Hercules Seals, but from their website it looks like the sort of place that would have what you need. I'm wondering how your "friend" approached this. Did he take the old seals in for comparison or just contact them with a loader brand and model number? The place I go to for cylinder seals has never failed to match what I need. They don't care what brand or model it came from.
Harry in Ky
Veteran Member
Pneu-Draulics, Inc
Pneu-Draulics is an industry leader in industrial seals and O-rings. We offer a vast selection of high-quality seals for hydraulic and pneumatic applications.
www.pneu-draulics.com
This is where I go. You might contact them with the sizes and dimensions of the parts you can't find elsewhere and see what they can do.
Slowpoke Slim
Elite Member
- Joined
- Jan 6, 2017
- Messages
- 3,629
- Location
- Bismarck, ND
- Tractor
- Husqvarna YTH24V48 riding mower, Branson 3725CH
I have had several hoses made by a local hydraulic shop. I know they also rebuild cylinders, I've just not had to have mine done yet. But they have done cylinders for folks I know. Point is, this is not something you should have to go to a "dealer" for. See if a local hydraulic shop can rebuild them for you. The one I use is in a Napa store across the river in Mandan. Guys just carry in cylinders and drop them off, and the shop guys rebuild them. They have also normally just made my hoses while I wait. Maybe a shop local to you can do the same?
Cougsfan
Veteran Member
- Joined
- Sep 10, 2008
- Messages
- 1,568
- Location
- Eastern Washington State
- Tractor
- Ferguson TO35, Branson 4720CH
One of the cylinders on my FEL is leaking, too. I think I could repair it, so I started looking for seals to buy. Both the local tractor shop and my Branson Dealer said they didn't have the parts and to send it to a hydraulic shop for repair. Haven't done anything yet. Waiting for winter.
Stimw
Elite Member
A good hydraulics shop should be able to match up the seals with generic seals.
I have recently taken 3 different cylinder parts to a local shop and had them match the parts.
If there is no damage to the cylinders it's a simple process.
I bought plain cups for an old Clark Forklift tilt cylinders and had to use hole punches for the rod and bolt holes.
I try to avoid OEM parts. I have a 5000# CAT Forklift and the main lift cylinder repair kit from the dealer was $150. for half dozen parts!!
I have recently taken 3 different cylinder parts to a local shop and had them match the parts.
If there is no damage to the cylinders it's a simple process.
I bought plain cups for an old Clark Forklift tilt cylinders and had to use hole punches for the rod and bolt holes.
I try to avoid OEM parts. I have a 5000# CAT Forklift and the main lift cylinder repair kit from the dealer was $150. for half dozen parts!!
Zork
Veteran Member
- Joined
- Dec 14, 2003
- Messages
- 1,103
- Location
- Virginia
- Tractor
- '04 Branson 3520, '51 Fergy, '96 MTD 18/46, '02 Craftsman GT5000/48
My guy used google and found Keno Tractors in Or, had my exact 2004 3520 bucket cylinder seals- worked great.
Jinma Tractor Dealer & Mahindra Tractor Dealership | Best DEALS HERE | Affordable Tractors
Best prices on tractors and tractor equipment here! We are the largest Jinma dealer, fully stocked and ready to deliver. We also maintain the largest Jinma parts department on the west coast. We sell affordable tractors: new tractors and used tractors, Jinma Tractors, Mahindra Tractors, Branson...
www.kenotractors.com
