Looking for Discontinued gasket

   / Looking for Discontinued gasket #1  

tcartwri

Veteran Member
Joined
Mar 28, 2010
Messages
2,489
Location
Ontario
Tractor
CT235
Long time no post... I'm in a bind.

I'm looking for a cross reference for Bobcat PN# 6697252, Gasket, for the hydrostatic assembly.

It goes between the Front Cover casting and the pump body.

Bobcat CT235 SN# A9JY11001 & above.

Hopefully Kioti still carries the part, but I don't have a parts manual for them.

Thanks.
 
   / Looking for Discontinued gasket
  • Thread Starter
#4  
This is the part in question. You can see the deformity in two places. I don't know how it ever not leaked.

PXL_20200926_142615729.jpg
 
   / Looking for Discontinued gasket #6  
might research Permatex Grey. Have used it for years. Has more holding ability than most. Always used on rear axle covers. No leaks.... a bit tough to take apart though :)
 
   / Looking for Discontinued gasket #7  
I found this. 41
GASKET
GASKET,NLA - Was 6697252 you can buy gasket material and cut your own, or use Permatex® OPTIMUM RED Gasket Maker
 
   / Looking for Discontinued gasket
  • Thread Starter
#8  
might research Permatex Grey. Have used it for years. Has more holding ability than most. Always used on rear axle covers. No leaks.... a bit tough to take apart though :)

Ya, I would be hesitant to put that in a pump body..... The gasket also sets the clearance on the pump faces.

Bobcat NY has access to the part apparently. Will be ordering on Monday.
 
   / Looking for Discontinued gasket #9  
Interesting how the gasket got sucked in and cracked. Must be low pressure/vaccum in that area.
Curious what symptoms you had to direct you to this gasket. Did you have a lot of air introduced into the hydraulic fluid?
 
   / Looking for Discontinued gasket
  • Thread Starter
#10  
Interesting how the gasket got sucked in and cracked. Must be low pressure/vaccum in that area.
Curious what symptoms you had to direct you to this gasket. Did you have a lot of air introduced into the hydraulic fluid?

It's been like this since day one. ( the tractor is a 2011 )

You can see the witness marks on the gasket where it was clamped out of shape between the castings.

It started as a slow drip that I noticed in early summer and by the time I got my hay in the barn it was pissing fluid everywhere. No loss of performance to either the hydrostatic or the hydraulics.

PXL_20200926_142745267.jpgPXL_20200926_142801520.jpg
 

Tractor & Equipment Auctions

2007 FREIGHTLINER BUSINESS CLASS M2 DUMP TRUCK (A51406)
2007 FREIGHTLINER...
2010 INTERNATIONAL DURASTAR 4300 CARGO TRUCK (A50854)
2010 INTERNATIONAL...
2024 Iron Bull 20ft T/A Equipment Trailer (A49461)
2024 Iron Bull...
2025 Future Stump Grinder Mini Skid Steer Attachment (A50322)
2025 Future Stump...
2004 JOHN DEERE 5205 TRACTOR (A51406)
2004 JOHN DEERE...
2015 KENWORTH T300 SERVICE TRUCK (A51243)
2015 KENWORTH T300...
 
Top