Long 2610 wheel bolt torque

[dwilliams35]

I'm short one manual and kinda need this in a relative hurry: my boss's Long 2610 is snapping some wheel bolts,and we need to find out if anybody's got an actual torque spec for these lug bolts: The rears are 14mm x 1.5, the fronts are 12mm x 1.5.. Rears seem to all be grade 10.9, the fronts have 11.9 stamped on them, standard tapered-head lug bolt. Any help will be MUCH appreciated...

Thanks!

 

[trac]

I'm short one manual and kinda need this in a relative hurry: my boss's Long 2610 is snapping some wheel bolts,and we need to find out if anybody's got an actual torque spec for these lug bolts: The rears are 14mm x 1.5, the fronts are 12mm x 1.5.. Rears seem to all be grade 10.9, the fronts have 11.9 stamped on them, standard tapered-head lug bolt. Any help will be MUCH appreciated...

Thanks!

These values are takened out of the 2610 op manuel. I also checked in the 680 op manuel which is same power train. Rear bolt torque is 190 ft. lbs. ( 258 Nm ). Front wheel bolts are 90 ft. lbs. ( 122 Nm). Check all bolt torque after one hour of operation, then once daily until they remain tight. Good luck- Trac