Flail Mower Let's talk flail mowers

   / Let's talk flail mowers #301  
sunspot said:
I pulled the trigger on the Caroni. I spoke to Beverly and placed the order. The freight charge to my door is $230.00 so the final price will be $1925.95.
Like Dave's (The other Dave, not Davestractor), mine will be fresh off the boat.:D


Congrats!! Shiney new is nice :D
 
   / Let's talk flail mowers #302  
This batch of information on flail mowers has completely changed my mind from a bush hog and finish mower to one simple flail mower. I do have a large field(six acres) with heavy weed stock to cut out and I think a heavy duty flail for my 68 PTO Hp would be the answer. Thanks for the discussion everyone.
 
   / Let's talk flail mowers #303  
jrl@nf.sympatico.ca said:
This batch of information on flail mowers has completely changed my mind from a bush hog and finish mower to one simple flail mower. I do have a large field(six acres) with heavy weed stock to cut out and I think a heavy duty flail for my 68 PTO Hp would be the answer. Thanks for the discussion everyone.

Yep this thread got me and mine is going to show tomorrow. I went for the BETST flail vs the Caroni. I know i will miss the extra 4 inches a little, but I think I will get used to not having to worry about blowing grass onto my mulch beds! :eek: And being able ot brush cut up to 2" diameter saplings.
 
   / Let's talk flail mowers #304  
Tommorrow in the afternoon with a loader de-truckin' operation!
 
   / Let's talk flail mowers #305  
Here is a used 12' flail we just put new knives on. A little overkill for 10 acres I suppose. :D
 

Attachments

  • P1013451.JPG
    P1013451.JPG
    161.7 KB · Views: 437
   / Let's talk flail mowers #306  
DavesTractor said:
Here is a used 12' flail we just put new knives on. A little overkill for 10 acres I suppose. :D

Care to tell us the cost of reknifing a 12' flail...We are sitting down...:D
 
   / Let's talk flail mowers #307  
PaulChristenson said:
Care to tell us the cost of reknifing a 12' flail...We are sitting down...:D

In dollars or busted knuckles?
 
   / Let's talk flail mowers #308  
PaulChristenson said:
Care to tell us the cost of reknifing a 12' flail...We are sitting down...:D

Takes less than an hour, no tools, about $160 in knives.
 
   / Let's talk flail mowers #309  
Nice price on the knives. Mine're usually a bit under $3/knife ($2 if I'm lucky), one knife per inch of cutting width. That doesn't include shackles and clevis pins if they need to be redone. Total blade cost typically costs me roughly $2/acre of mowing, but that includes some rocky and less-than-flat ground but not many bushes.
 
   / Let's talk flail mowers #310  
Just looked at a Land Pride 72" flail mower. Wow...very pricey!! $4600.00

Think I'll keep by brush hog.
 
 

Tractor & Equipment Auctions

(30) 9' Pipe Fence Posts (A50515)
(30) 9' Pipe Fence...
2010 Ford F-150 4x4 Crew Cab Pickup Truck (A50323)
2010 Ford F-150...
2019 CATERPILLAR 289D SKID STEER (A51242)
2019 CATERPILLAR...
(1) 24' CORRAL PANELS W/ (1) 8' GATE (A51243)
(1) 24' CORRAL...
(4) Texas Built 25' Stand Alone Panels (A50515)
(4) Texas Built...
CATERPILLAR 12" BACKHOE BUCKET (A51242)
CATERPILLAR 12"...
 
Top