Using an offset flail mower to mow grass

   / Using an offset flail mower to mow grass #31  
I think mowing in general is very much like snow plowing... A whole lot of variables that affect the outcome.
I find that the higher my flail is set, the worse the cut gets. 3" results in a finish mower cut in normal to slightly high turf grass. If I'm running the flail elevated over my stream bank with tall vegetation, the cut quality is much less consistent.
 
   / Using an offset flail mower to mow grass #32  
I raised mine all the way up when I was getting the barbed wire out. I dont care too much about cut quality, but higher means I have to cut more often. It has 3 settings. I think I'll use the middle one next.
 
 

Tractor & Equipment Auctions

74in FEL HD Round Back Bucket (A51039)
74in FEL HD Round...
PALLET OF TARPS, UMBRELLAS, AND PORTABLE SHADES (A50854)
PALLET OF TARPS...
PALLET OF (2) THERMOKING TRI PAC UNITS (A50854)
PALLET OF (2)...
2011 L3 MEP-806B GENERATOR (A51222)
2011 L3 MEP-806B...
2000 John Deere 1860, 30ft Wide, Gandy Box, Wing Fold, 7.5in Spacing (A51039)
2000 John Deere...
2015 F-550 Bucket Truck Gas Engine (A51039)
2015 F-550 Bucket...
 
Top