Leave hydraulic open

   / Leave hydraulic open #1  

Johnmath

New member
Joined
Mar 2, 2010
Messages
2
I have a Farmall 400 to run a wood splitter. The wood splitter has a valve to run the ram on the splitter so I bungee the hydraulic open on the tractor and run the ram with the lever on the splitter. Does this do any damage over time to the tractor hydraulic pump or anything else?
 
   / Leave hydraulic open #2  
I have a Farmall 400 to run a wood splitter. The wood splitter has a valve to run the ram on the splitter so I bungee the hydraulic open on the tractor and run the ram with the lever on the splitter. Does this do any damage over time to the tractor hydraulic pump or anything else?

Welcome to TBN:D

It is a common practice to bungee the lever to provide flow to a logsplitter-no harm done.
 
   / Leave hydraulic open #3  
It won't hurt a thing,
I run a backhoe off my 400 that way,
till I was able to get a larger pump set up on it.
the splitter might be a little slow @ idle though.
 
   / Leave hydraulic open
  • Thread Starter
#4  
Thanks for your help.
 
   / Leave hydraulic open #5  
as long as the splitter is open center and has the proper retun / relief valves.. no issues.

soundguy
 

Tractor & Equipment Auctions

2015 Ford F-550 4x4 Knapheide Service Truck (A51692)
2015 Ford F-550...
2019 Allmand Night-Lite V-Series S/A Towable Light Tower (A52377)
2019 Allmand...
Nissan CF60 6,000lb LP Forklift (A51691)
Nissan CF60...
Ambulance (A51692)
Ambulance (A51692)
(10) 24' Free Standing Panels (A50123)
(10) 24' Free...
2018 Genie GTH-636 (A50123)
2018 Genie GTH-636...
 
Top