kubota l4310 adding remotes

[rymo]

I have a kubota l 4310. I have a hydraulic thing with three plugs and three nuts nearthe brake pedals can I tap into that or do I have to buy the block from kubota?

 

[paulwestski]

I have a kubota l 4310. I have a hydraulic thing with three plugs and three nuts nearthe brake pedals can I tap into that or do I have to buy the block from kubota?

Can you post a picture?
We can help more easily then.

 

[cycle_gator]

I assume you are referring to the mount under the floorboards where the filter is located?

Do you have any other hydraulics on the tractor other than the three point? If not the answer is yes you can hook into that for rear remotes. You will need a control Valve with power beyond capability. Other than that the hookup is pretty straightforward.

 

[Piston]

If he did have a loader on the tractor, does that change the answer? I'm only asking for the OP's benefit......not because I just happen to be doing the same thing on my L4610

 

[Chilly807]

If there's a loader, the easiest place to tap into is between the loader and the 3ph. If not, you need to go into the hydraulic distribution block before the 3ph. It has to be a series circuit in any case.

Sean

 

[cycle_gator]

Exactly.