Kubota L4240
- Thread starter Mbridg06
- Start date
- Views: 1842
-
- Tags
- kubota l4240
bumperm
Veteran Member
I'm assuming there is a start lockout if the PTO is engaged?
Could be PTO is engaged, or a bad switch or open wire, or CPU (if it's got one), etc. Maybe try bypassing the PTO safety switch?
On my new B3350, one of the first things I did was bypass the seat occupied switch (it's normally open, so requires a jumper wire to bypass). Not recommending bypassing safety stuff, but in my case I have a difficult time looking aft without scooting forward on the seat to turn by bod - - and that kills the engine - - obviously not workable.
bumper
Could be PTO is engaged, or a bad switch or open wire, or CPU (if it's got one), etc. Maybe try bypassing the PTO safety switch?
On my new B3350, one of the first things I did was bypass the seat occupied switch (it's normally open, so requires a jumper wire to bypass). Not recommending bypassing safety stuff, but in my case I have a difficult time looking aft without scooting forward on the seat to turn by bod - - and that kills the engine - - obviously not workable.
bumper
Barneyhunts
Gold Member
- Joined
- Mar 4, 2007
- Messages
- 373
- Location
- Dimock, Pa.
- Tractor
- Kubota L4240 Kubota B7800, Kubota BX2200
Mine will not start if the PTO is engaged. Might be as simple as moving the lever. Need to have the PTO clutch pedal depressed as well.
Barney
Barney
