Kubota L245dt Question

   / Kubota L245dt Question #1  

E119744

New member
Joined
May 21, 2013
Messages
9
Location
Caldwell, Ohio
Tractor
Kubota L245DT
I am installing powersteering on my l245dt kubota , I mounted the steering valve under the dash . Im trying to figure the best way to supply the steering valve with hyd. fluid ...There is a block under my seat that has 4 bolts on the front and a hyd supply going through the middle of it . Can i get my power from there , If so how ? . Thanks
 
   / Kubota L245dt Question #2  
Does your block look like this?
324481d1372128051-loader-lift-empty-bucket-strains-2013-06-24-18.22.41_sm.jpg


If so, I believe you could take power from the top left port (top left in the pic) or the bottom center. The top left feeds the power steering on this tractor, and the hose into the top of the crankcase (toward the right) is the return from the power steering.
 
   / Kubota L245dt Question #3  
Is this a kit you ordered or did you do it all from scratch
 

Tractor & Equipment Auctions

(3) VACUUM PUMP TANKS (A50854)
(3) VACUUM PUMP...
2004 Sterling L8500 4,000 Gallon T/A Water Truck (A50323)
2004 Sterling...
2018 JLG 3246ES 32ft Electric Scissor Lift (A50322)
2018 JLG 3246ES...
2012 FORD F-550 SUPER DUTY XLT SERVICE TRUCK (A51406)
2012 FORD F-550...
2006 MACK CV713 KILL TRUCK (A50854)
2006 MACK CV713...
3000 Gallon Black Poly Water Tank (A49461)
3000 Gallon Black...
 
Top