Kubota bucket hooks

[BlacknTan]

That is a great design!

Thank you very much, Kenny.... I consider you to be the hook-meister!

 

[clee4020]

Well it's been over a year now and I have not put the hooks on...yet. Between work and twin baby girls, I don't get a chance to go outside and play as much as I used to. As you can see from the attached pics, the bucket level indicators are made from 3/16" metal. The top lip that forms a "channel" is also made of 3/16" metal. I found that 1.5" sq. tubing fits nicely under and between the indicators and top lip to fill the channel. I thought about buying some 1.5" round tubing, but I happen to have enough 1.5" sq tubing that is 3/16" thick in the shop. Plus the sq. tubing will give a good flat surface to weld to. Should I weld an additional 1/4" plate to the top of the indicators and then weld the hooks to that? I plan to center the hooks with curl cylinders. Any suggestions?

View attachment 274716View attachment 274717

Is the sq. tubing gonna be overkill?

 

[kennyd]

Thank you very much, Kenny.... I consider you to be the hook-meister!

Thanks BnT

 

[TripleR]

Here's mine. Philip.

I used that pattern for the hooks on our L5740 and got the hooks from Truck and Tow.

 

[clee4020]

Well it's been over a year now and I have not put the hooks on...yet. Between work and twin baby girls, I don't get a chance to go outside and play as much as I used to. As you can see from the attached pics, the bucket level indicators are made from 3/16" metal. The top lip that forms a "channel" is also made of 3/16" metal. I found that 1.5" sq. tubing fits nicely under and between the indicators and top lip to fill the channel. I thought about buying some 1.5" round tubing, but I happen to have enough 1.5" sq tubing that is 3/16" thick in the shop. Plus the sq. tubing will give a good flat surface to weld to. Should I weld an additional 1/4" plate to the top of the indicators and then weld the hooks to that? I plan to center the hooks with curl cylinders. Any suggestions?

View attachment 274716View attachment 274717

Still don't have an answer...yall think what I suggested is a good idea?

 

[TripleR]

I am no expert and need to reinforce the one on our 8540, but my thoughts were that the square tubing would be sufficient. Will follow this with interest. I have the HD bucket on my 5740.

 

[Curtis Gray]

Here's what I did. The receiver in the center can be used for either a slip hook, grab hook, or a trailer hitch with ball , and all are interchangeable, and the possibilities are limitless. Works well for me.

 

[TripleR]

Here's what I did. The receiver in the center can be used for either a slip hook, grab hook, or a trailer hitch with ball , and all are interchangeable, and the possibilities are limitless. Works well for me. View attachment 277907

Very nice.:thumbsup:

 

[mrgrubb]

Added a reciever like TripleR did!! Works great!!

 

[TripleR]

For clarification, Curtis Gray did the receiver; indeed very nice.:thumbsup:

 

[pedalstomper78]

Tractor help has a bolt on hook kit that uses 2, 1/4" plates to sandwich the loader. Should be enough to make things stiff enough that you shouldn't bend the bucket if you use it within reason.

 

[RAYJAY]

part number ???? web link ??? please lol sound good

 

[pedalstomper78]

Bolt on 3/8" chain grab hook for your tractor, loader, or other implements

They don't have a picture up on it. I'm headed out of town for the next few days so I won't be able to get a picture of mine. Used it this weekend though in putting the "summer" toys away and getting the "winter" ones ready for the tractor. Handy stuff.

 

[C-Range]

Hi All,

If you are looking for bucket hooks, look no further than:

Ken's Bolt on Grab Hooks

 

[BlacknTan]

Hi All,

If you are looking for bucket hooks, look no further than:

Ken's Bolt on Grab Hooks

Yes!

Ken does a great job on the hooks, and he's a TBN member. Proudly made in the USA!!

 

[devildog1]

Yes I agree have 3 on my Grand L3540 , Ken's are top choice and a member of this forum.
DevilDog