Kubota B6100 3ph problem

[Leejohn]

I think I go back and recheck the feedback rod like brain55 said before. It sure doesn't look like it has been moving in the slide guide.

 

[kcabbie]

LeeJohn, Thanks for the reply! I had removed the feedback rod and still no luck. I took the control valve to the Kubota dealer and they noticed the bolt which held the spring/ball was cracked. He suggested I replace that as it may have been putting the ball in a bind not allowing it to go back into the bolt. So in 2-3 days we shall see.

Thanks for everyone help, it is greatly appreciated!