Kubota B1750 won't go forward

[stephengriger]

So I was moving snow yesterday and my B1750 stopped going forward. It will still go in reverse, but when you push the peddle to go forward, it just sinks down.

It looks like all of the linkages are attached, so I am curious if anybody else has had a similar problem or has any ideas about what to check.

 

[Professor Marvel]

parking brake ?

 

[SDT]

So I was moving snow yesterday and my B1750 stopped going forward. It will still go in reverse, but when you push the peddle to go forward, it just sinks down.

It looks like all of the linkages are attached, so I am curious if anybody else has had a similar problem or has any ideas about what to check.

"Sinks down?" Do you mean stalls the engine?

 

[stephengriger]

no, like no response from the peddle. it goes on reverse, but when you press the peddle forward nothing happens.

 

[Tractor Seabee]

Sounds like you have a disconnect somewhere in the train of parts.

Ron

 

[newbury]

Did you check your fluid level?
My B7610 started doing similar but worked better after warming up. My fluid level was fine.

 

[SDT]

no, like no response from the peddle. it goes on reverse, but when you press the peddle forward nothing happens.

I would inspect the mechanical connections between the pedal and the transmission again.

Does the pedal "feel" normal when pressing it for forward motion?

SDT

 

[stephengriger]

the peddle feels soft when pushing it forward, like a brake paddle when a line bursts.
I'm going to try cleaning the screens and checking our the hydro fluid. I checked the linkages again, but they all look good

 

[SDT]

the peddle feels soft when pushing it forward, like a brake paddle when a line bursts.
I'm going to try cleaning the screens and checking our the hydro fluid. I checked the linkages again, but they all look good

Expect something in linkage, external or internal.

SDT