Kubota accesories

Jchonline · Mar 25, 2019

1930 said:
I am gonna pick up my new L2501/loader/backhoe combo in a couple of weeks. Its my first tractor, Ive since learned I need a 3rd function added to run a grapple, I would have thought that the dealer would have tried to sell me everything under the sun including the simonize but no, he even suggested I not buy the backhoe cause of cost.

He has ( as he says ) built my tractor already.

Is it too late to have some accessories added without getting assraped cause now they have to go back and undo some thing they have done to add the loader and backhoe?

I also would like a bucket level indicator added cause Ive read its a good thing to have.

Is there anyplace online that I can get an idea of the cost of these accessories ( just the Ill install it myself out the door price ) so that I can get an idea of what I should expect cost wise before I contact dealer?

Also dont forget about things you need to service the tractor and common tools you will likely need around.

Grease gun, extra 3 pt pins, chain for pulling with that drawbar. if you are doing the 50 hr service...filters, fluids. Others here https://www.tractorbynet.com/forums...t-have-tools-equipment-new-3.html#post5223088

The Deerslayer · Mar 25, 2019

1930 said:
R4. If he is charging me for the installs I don't expect it to be out of line.

Good tip on the grab bar, I may get that later

Congrats on the new tractor and enjoy it. :drink: Post a pic once you have it delivered.

crazyal · Mar 25, 2019

Not really going to break the bank but I would add a knob for the steering wheel. The Kubota one seams good quality other than the orange color faded. Probably only $25 but well worth it and maybe the dealer will throw it in for free.

/pine · Mar 25, 2019

If by drawbar you mean a 3 point hitch type drawbar...a great accessory is a stabilizer....with the stabilizer installed just bolt any size trailer ball to the drawbar for moving anything with the typicap ball hitch...

Stabilizers are not difficult to make yourself but they are available commercially:

EMP Tractor Draw Bar Stabilizer for Category 1 Tractors, Model# 735-1 | Northern Tool + Equipment

MaineGuy1 · Mar 25, 2019

I think you mean the draw bar that is attached to the frame and not the 3pt hitch? If you use the 3pt hitch to haul trailers, please read up on the hazards of this so you know what you are dealing with. All OEM's will tell you the safest way to haul anything is with the tractor draw bar attached to the frame. Get them to weld bucket hooks on for you, they come in very handy.

/pine · Mar 25, 2019

A lot of operators install trailer balls on other implements like box blades, carry all's etc... I have one on my boom pole which is the handiest...dedicated 3ph receiver hitches are quite popular but cost a bit more than a 3ph drawbar bracket...

If you're pulling stumps or yanking on other deadweight objects the tractor (not 3ph) drawbar is the ticket...as it is below the axle and can prevent flipping...on many CUTs, SCUTs it would be impractical to try to tow a trailer from the tractor drawbar...

MaineGuy1 · Mar 25, 2019

/pine said:
A lot of operators install trailer balls on other implements like box blades, carry all's etc... I have one on my boom pole which is the handiest...dedicated 3ph receiver hitches are quite popular but cost a bit more than a 3ph drawbar bracket...

If you're pulling stumps or yanking on other deadweight objects the tractor (not 3ph) drawbar is the ticket...as it is below the axle and can prevent flipping...on many CUTs, SCUTs it would be impractical to try to tow a trailer from the tractor drawbar...

I agree the 3pt hitch and ball has it's uses. Don't forget though there is no weight holding the 3pt hitch down if you are hauling a trailer. If the load shifts to the back, the 3pt hitch will raise, possible flipping the trailer. Never haul a wagon with people in it by the 3pth hitch because of this.