Komatsu D10s Crawler/Loader

   / Komatsu D10s Crawler/Loader #1  

BD Housand

New member
Joined
Nov 25, 2024
Messages
4
Location
North Central Florida
Tractor
Yanmar YM 2200 (2); MF 245; Farmall 140 (2); Farmall C; Komatsu D10s.
I have a grey market Komatsu that pops the welds on the track pins when turning. Is there a cure for this, and/or is there a possibility to change to rubber tracks without major undercarriage changes? Thanks, BD
 
   / Komatsu D10s Crawler/Loader #2  
From what I've read, pushing a heavy load and turning is a no-no. Best to push forwards, back-up, take a different angle and push forwards again. The Komatsu and Yanmar machines both behave this way.
 
   / Komatsu D10s Crawler/Loader
  • Thread Starter
#3  
Thank you for the tips! It tough being a rookie on this little machine.
 
   / Komatsu D10s Crawler/Loader #4  
Looks to be a good machine.

1742597824025.jpeg
 
   / Komatsu D10s Crawler/Loader
  • Thread Starter
#6  
the D-10 I have looks like this minus the top, and with a backhoe added. I think in this picture is the same guy that sold to me, over near Tulsa.
 

Tractor & Equipment Auctions

2019 CATERPILLAR 308E2 CR EXCAVATOR (A50458)
2019 CATERPILLAR...
2019 New Holland C227 Skid Steer (A50657)
2019 New Holland...
2009 Mazda 5 Van (A48082)
2009 Mazda 5 Van...
Pulsar PTG1022H Walk-Behind String Trimmer (A48837)
Pulsar PTG1022H...
Badger 26CC Pole Saw/Hedge Trimmer (A48836)
Badger 26CC Pole...
2018 FREIGHTLINER CASCADIA TANDEM AXLE DAY CAB (A50505)
2018 FREIGHTLINER...
 
Top