Kioti NX HST can not shifting

[Tigershark]

Pretty sure the linkage between my in cab shifter H M L and the transmission fell off. The shifter has no pressure and just slides through what should be the gears. Can anyone that has one take a picture of theirs and post it up for me to reference? Here is what mines like thanks for any help

 

[ptsg]

Check the Michigan Iron & Equip website. They have all the parts manuals available there.

Here is the link to the Range lever linkage: https://www.michiganironandequip.co...1-115|~NX5510CH-M-CHASSIS/01115NX5510CH0269/y

 

[Tigershark]

thank you. It looks like all the parts are there

 

[Midniteoyl]

Is that set screw still tight?

Theres one in the cab and at the transmission lever arm as well.

 

[Tigershark]

Ok thank you all, I’ll have to drive back out to the farm and check if that’s what it is that would be great. I’ll post an update.

 

[MinnesotaEric]

Have somebody get into the cab and cycle the range selectors from low to high. Follow the linkage. If the linking is moving and that movement goes into the case, then the likely cause is the shift fork has come loose from the range shift arm (the shaft going into the case)

 

[Tigershark]

Eric when we shift the linkage barely moves it moves a little but I would expect it to move more EveryThing looks intact I was expecting this to move more I followed everything down into the boot of the shifter and everything is attached

 

[Tigershark]

Just an update ended up being a broken roller pin Got it punched out and replaced and everything works well Thanks for the help

 

[IndyJay]

Just an update ended up being a broken roller pin Got it punched out and replaced and everything works well Thanks for the help

Glad it was a cheap, easy fix!

 

[ptsg]

Easy fix indeed. Thanks for the update. We often don't get to hear back on threads like this.