Kinco KMG38 Sickle Mower

[rayseguin]

could you send me a PDF file of the manual, I recently picked up a KMG 38 at a yard sale and have no information on it, would be great if you could send me a copy of the manual,
send to rayseguin@telus.net

 

[Wildme]

Harl,
Did you get the Sickle going? I have the same problem. I'm now considering buying a new carb.
Pw

 

[Sigarms]

Harl,
Did you get the Sickle going? I have the same problem. I'm now considering buying a new carb.
Pw

Harl's one and only post was in 2009. I wouldn't expect a response

 

[rayseguin]

Took the motor apart to change leaking seals on both output shafts and will also seal up the oil filler spout where it joins the motor, still no luck finding a manual, I have the Tecumsa engine.

 

[marv2005]

Knife sections are part number 207-231 from Webb Cutting Components online. The rivets are part number 458-135.

Original Kinco KMG-38 newly manufactured serrated knives 2" x 2-13/16", Hole space: 1-3/8"(single knives)(aka Jari):
Jari Section 1.375 RUS garden mower Webb Cutting Components

Original Kinco KMG-38 replacement rivets for above knives here:
Jari, Montgomery Ward, Simplicity standard rivet 3/16 x 1/2-inch, (1 pc) Webb Cutting Components

 

[marv2005]

Here are some pics as I removed my Tecumseh carburator.

 

[marv2005]

Were you able to find a replacement carburetor online? I obtained a replacement carburetor for my 3.5 hp Tecumseh here:

Tecumseh Carburetor Parts | Tecumseh Carburetor Repair Kit

 

[marv2005]

I may have a copy of the 3.5 Tecumseh 2-cycle motor manual, depending on the vintage, if you still have a need.

This manual covers the following basic type or model
numbers dependent on age of product: AH520, AH600,
AV520, AV600, HSK600, TVS600.
This manual covered many engines under an Old form of
Identification which will need to be reviewed as well.
TYPE / SPECIFICATION NUMBER 638-670 1398-1642 and
Craftsman 200 Series Models.

 

[marv2005]

Kinco KMG-38 V belt obtained from Tractor Supply. Correct size is 1/2 inch by 38 inches.

 

[marv2005]

My Kinco KMG-38 with a Tecumseh got a replacement carburetor that I ordered online. It needed no adjustments after installation.