Just another junk chainsaw

[xyz123]

Thats a zenoah brand when OEM but it is not. China made clone of it.

Some of them folks really like. But if need parts. You hit. Better by 2.

 

[D'oh]

Thats a zenoah brand when OEM but it is not. China made clone of it.

Some of them folks really like. But if need parts. You hit. Better by 2.

That Recoil looks like I would need parts.

What is a Better Chinese choice in Canada?

Amazon.ca : chainsaw

 

[Snobdds]

Still cant believe that Mac 125 with 101 engine is only 4 miles from me.

Thats just unreal around here. FS too.



View attachment 5405292View attachment 5405293

Go get it, I'll buy it.

 

[xyz123]

Maybe contact a actual Farmertec dealer in Canada to save on tariffs and duty.

I looked and they have a warehouse there. But no G366 pro ones listed. They are ugly with carbon covers but better parts.

Is the newer version of the 361 with the better air filter set ups.

Walbro carb etc too.

 

[xyz123]

Go get it, I'll buy it.

Ya could you imagine how much shipping that thing would cost.

Take alot of $$$$ upfront to do that.

Just PHO dry of a normal one.

 

[Snobdds]

Money is no object.

How much does he want?

I'll give you a finders fee.

 

[xyz123]

They are asking 2500.

Seems pricey to me.

I ran a like new one a friend had from SC at a gtg many years ago.

Nope no pics of that one. Sure Brad took some though.

 

[Snobdds]

They are asking 2500.

Seems pricey to me.

I ran a like new one a friend had from SC at a gtg many years ago.

Nope no pics of that one. Sure Brad took some though.

View attachment 5405315

For that money I would need to see the piston and cylindar.

Is is a 101B or some other variant.

 

[xyz123]

Plus I am not a mac guy to know all the differences. Would need ole Al that owns like 3 different 125's to check something like that over. He is hour west of me.
So just to much trouble as he is older then me and retired too.

I ran his Italy made 70cc one and traded him my 805.

805 still had mac bar and mac chain.

 

[Snobdds]

Plus I am not a mac guy to know all the differences. Would need ole Al that owns like 3 different 125's to check something like that over. He is hour west of me.
So just to much trouble as he is older then me and retired too.

I ran his Italy made 70cc one and traded him my 805.

805 still had mac bar and mac chain.

View attachment 5405317View attachment 5405318View attachment 5405319View attachment 5405320View attachment 5405321

Al is a grumpy guy as of late.

Can you give me the info on how to contact this guy?

 

[xyz123]

Al is a grumpy guy as of late.

Can you give me the info on how to contact this guy?

Al is in my group. Nice and mellow.

Where do you see him being grumpy?

Will be in PM GL

 

[xyz123]

You might just be in luck.

Mcculloch 125 with 101 kart engine installed, New mounts. New reeds. New intake boot Fully Adjustable walbro carb, Installed decompression valve to assist with starting Carb recently rebuilt Ran great last winter but was acting up this year when tried to use and have not diagnosed. Too many saws so letting some go. Will consider shipping at buyers expense.

 

[sd455dan]

XYZ 123 the info on the Vevor advertised as a 62 CC saw being a Zenoah copy is helpful, so far son put about 5 tanks through it, running decent but a bit rich up top will lean it a bit. I told him to be careful with the starting method- no drop starting these new fangled slow pull energy storage pull starts.

I was wondering what the 62 ?? CC saw branded as a Huyosen 62 CC is a copy of?
Walmart was selling them , Fuddy bought one and i also got one as well.
It runs decent as well -thought it looks more like a Husky copy but maybe not.

Any insight on those two? Also most recently bought the little top handle 25cc Vevor top handle as well, that little saw runs really well and has an angry sound to it at even idle..

Thanks for any thoughts on these inexpensive saws.

 

[xyz123]

Most of the zenoah clones sold in the 58 62 68 if you measure the bore and stroke come out to 56.5cc saws. Like the old 357xp used to be.

I never owned one in this size. Just going what the guys in my group tell me once they check them.

Best deal I seen on one of those in the US so far has been the Joncutter 5800 for $99 shipped from the US warehouse in NJ.

 

[xyz123]

The little one you talk about. If looks like this. Is the 25cc version of the zenoah clone. Older TH that was done by Zenoah in OEM and for husky in T425.

It's a fine saw but hard to get parts for. It's also heavier by a bit. Then the G2511 2511 newer echo clones. If given the choice got for the echo clone ones.

 

[xyz123]

These craftsman top handles are not homelite like someone was saying in other thread.

They are the Poulan 25 25D S25D S25DA series saws. Countervibe series ones back in the day.

 

[xyz123]

More of those craftsman poulan made.

Then another one for wizard.

Then poulan them selves.

 

[xyz123]

Well you seen stock, woods ported 166 ext.

This is the biggie. Race ported Dolmar 166 exhaust port.

 

[sd455dan]

The little one you talk about. If looks like this. Is the 25cc version of the zenoah clone. Older TH that was done by Zenoah in OEM and for husky in T425.

It's a fine saw but hard to get parts for. It's also heavier by a bit. Then the G2511 2511 newer echo clones. If given the choice got for the echo clone ones.

View attachment 5414619

Yep that looks like it and has the primer bulb.


Thanks, so if I want to get an echo clone (gave the little Vevor to a son)- a Farmertec Joncutter G2511 for $110 shipped, OK deal?

CA STOCK-25cc JonCutter G2511 Top Handle Arborist Gasoline Chainsaw Power Head With 12inch Saw Chain and Guide Bar 2-4 Days Delivery Time Fast Shipping For CA Customers Only from China manufacturer - Farmertec

CA STOCK-25cc JonCutter G2511 Top Handle Arborist Gasoline Chainsaw Power Head With 12inch Saw Chain and Guide Bar 2-4 Days Delivery Time Fast Shipping For CA Customers Only offered by China manufacturer Farmertec. Buy CA STOCK-25cc JonCutter G2511 Top Handle Arborist Gasoline Chainsaw Power...

www.farmertec.com

 

[xyz123]

Yep that looks like it and has the primer bulb.


Thanks, so if I want to get an echo clone (gave the little Vevor to a son)- a Farmertec Joncutter G2511 for $110 shipped, OK deal?

CA STOCK-25cc JonCutter G2511 Top Handle Arborist Gasoline Chainsaw Power Head With 12inch Saw Chain and Guide Bar 2-4 Days Delivery Time Fast Shipping For CA Customers Only from China manufacturer - Farmertec

CA STOCK-25cc JonCutter G2511 Top Handle Arborist Gasoline Chainsaw Power Head With 12inch Saw Chain and Guide Bar 2-4 Days Delivery Time Fast Shipping For CA Customers Only offered by China manufacturer Farmertec. Buy CA STOCK-25cc JonCutter G2511 Top Handle Arborist Gasoline Chainsaw Power...

www.farmertec.com

Thats Canada stock.

No USA stock at Farmertec right now.

Got to watch it there. Have warehouses in China. Then USA, Canada and Australia warehouses too.

If in USA. Hockfire saws Scotty is a dealer south of me. He has the G2511 Farmertec ones for 99 too. But sold out.

He also has the V-modest one for 129 in stock. 6 left. V-Modest 2511

I got both and same saw different colors.

Scotty goes through the saws before shipping so no surprises like you get sometimes.

Another good thing he is here too and does warranty work for them. @Hockfire Saws