Just another junk chainsaw

[Hay Dude]

They use the normal nozzle on the oil like I use on my husky one. Just so you know.

View attachment 3463724

Hmmmm, I kinda like the auto shut off on the oil…..
Fuel definitely more important tho.


Maybe best to get 2 Holzforma tanks and swap auto nozzels onto one tank.

 

[xyz123]

Hmmmm, I kinda like the auto shut off on the oil…..
Fuel definitely more important tho.


Maybe best to get 2 Holzforma tanks and swap auto nozzels onto one tank.

Next time their off I will see if they are swap-able.

 

[xyz123]

F-ing rain since. I cant set up phone so I can time the cuts.

Like the old days when local would be here and just time and right down times for me. Using stop watch which is close enough.

 

[Hay Dude]

I’m gettin it too
All week

 

[5030]

Precip is good, in moderation.

 

[xyz123]

Finally a opening where I can cut and swap stuff and then cut again.

I wanted to try something. OEM 200T is 14K max stock.
Farmertec G111 200T clone running stihl 63PS3 3/8LP new loop I made. Untouched.
First run how I use working it. 10.8-11. First cut letting it work.
2nd run turned up to 12.8-13.
3rd cut I got hung up in cut.
One marked 63PS3 is lower rpm.
One marked 3/8LP turned up higher rpm.
8x8. Old Ohio speed wood. Dry pine.

Farmertec G111 200T clone. 12.8-13 rpm.
First test cuts with Oregon nano 325 043 set up.
I’ll be totally honest I love the stuff on echo 2511 25cc saws.
I’ll be sticking to my hood 3/8LP in stihl 63PS3 or Farmertec clone version of it in 63PS.
I just feel the 35cc cuts better with It.

I will be selling off the stihl nano set up.
Oregon nano 325 043 speedcut set. Stihl 200 200T 201T 192 193 Iff top of my head.
1 14” bar maybe 10 test cuts. 1 clutch drum 325 that used the 3/8LP worm gear way it is made. 10 cuts.
1 14” chain 10 cuts.
1 new In box chain.
I will trade for?
or price it all out right plus shipping. Once I get Inside .

 

[xyz123]

35cc is going back to 3/8LP 63PS3 and clone version of 63PS.

Nano like the 25cc saws and so do I for it.

12.8-13 tune NANO 325 043 - 8.66 hanging tossed, 7.72 tossed, 7.22, 7.44, 7.60.

3/8LP stihl 63PS3
12.8-13 5.53, 5.50 and hung one 6.40 tossed.
Tuned fat 10.8-11 7.15 not pushing tossed, 6.65, 6.25

 

[Hay Dude]

105cc. Thats a lotta motor.

 

[xyz123]

Log into Facebook

Log into Facebook to start sharing and connecting with your friends, family, and people you know.

www.facebook.com

I wouldnt buy that for that much. Not a clone 070.

 

[xyz123]

@Hay Dude

You can have a G070 Farmertec like that one on their new colors at your door for $315 shipped from their US warehouse. Why I say with that b+c hardnose at that not a great deal.

I would never ever want those myself. Like 24lbs plus PHO.
I'd get a G660 for same money or pay extra for the G888

105cc Holzfforma® Orange Dark Gray G070 Gasoline Chain Saw Power Head Only Without Guide Bar and Saw Chain All Parts Are For 070 090 MAGNUM Chainsaw from China manufacturer - Farmertec

105cc Holzfforma® Orange Dark Gray G070 Gasoline Chain Saw Power Head Only Without Guide Bar and Saw Chain All Parts Are For 070 090 MAGNUM Chainsaw offered by China manufacturer Farmertec. Buy 105cc Holzfforma® Orange Dark Gray G070 Gasoline Chain Saw Power Head Only Without Guide Bar and Saw...

www.farmertec.com

 

[xyz123]

 

[Hay Dude]

20lbs+ gets old after a few hours

 

[xyz123]

20lbs+ gets old after a few hours

Thats dry PHO. Now just add a 36" b+c and fill them up. G888 is over 32lbs like that. So G070 plus 2 more lbs.

Mine was with lighter 3/8 chain too. Come with 404.

 

[xyz123]

If any of you run the stihl 261.

A NY guy cnc mufflers after he scans oem to come up with his own better design.

He is doing the group members a 084 muffler right now.

His bolt on muffler showed 12% gains he said.

I like 2 piece mufflers and side exit too.

 

[Hay Dude]

I might give that a try. My 261C is my go to, go everywhere saw

 

[xyz123]

I had bought a nano set up for my Farmertec G111 200T clone. The nano cut slower then my stihl 63PS3 and clone 63PS on 35cc with open muffler. A074 mount.

So I made the work In 2511PN

Decided to just mod the A074 14” 59dl bar and use on rear handle 2511.

Since it cuts 12” buried no issues with the Egan pipe in it.

Oils great and dang I love the flippy caps

 

[xyz123]

I might give that a try. My 261C is my go to, go everywhere saw

Anything he does isnt cheap. Online Store — Precision Saw Service

He also stays sold out most times. You have to contact him and get put on the list as their made.

He showed a video in group how he scanned the 084 OEM muffler to get all the specs to set up to make those.

 

[xyz123]

Stihl 63PS3 full chisel 3/8LP v/s Oregon Nano 325 043 narrow kerf.

Echo 2511 25cc the Nano is great for use.

But on the 35cc Stihl 200T clone Farmertec G111. The full chisel 3/8LP does what it does best and out cuts it.

35cc is going back to 3/8LP 63PS3 and clone version of 63PS.

Nano like the 25cc saws and so do I for it.

12.8-13 tune NANO 325 043 - 8.66 hanging tossed, 7.72 tossed, 7.22, 7.44, 7.60.

3/8LP stihl 63PS3
12.8-13 5.53, 5.50 and hung one 6.40 tossed.

 

[xyz123]

Love the V-modest 2511 clone with spring assist recoil just like oem uses.
1/4” mini micro for the clean fruit tree pruning cuts.

Found 3 with some disease dead wood I missed during cold pruning time.

I was using rubbing alcohol to sterilize. Chain, a pruner blade and saw blade too. On some other stuff.

Was told diluted bleach works too.

 

[xyz123]

Amazing the stuff you forget you have.

I had bought this 12” for dads saw years ago. But then he told get a 14” 050