John Deere wagon wheel bolt pattern

[Vjf]

Does anyone know off hand what the bolt pattern is for a John Deere 1064 wagon, or what
rim will bolt up, ( 6 lug chevy or ford). I've ran searches here and googled with no luck,
and dealers have been no help.

Thank You,
Vince

 

[Vjf]

Well Vince, I found out that the bolt pattern is 6 on 6 inch. Most, if not all , truck patterns are 6 on 5 1/2 inch, also the center bore is roughly 4 5/8. you'll have to find an ag rim.
(so I'm talking to myself)

regards,
Self

 

[rdln]

Oh heck, I could have told you that.

 

[Robert_in_NY]

If you have any dairy farms around there you can stop and see if they have any old JD implement rims laying around. I got a couple from my friends dairy farm for my running gears as I have 5 different brands of running gears but only need two spares as the running gears all use similar bolt patterns so two different spare rims/tires and I am set for any flat on my five gears.

When implements die on dairy farms they usually get put in a fence row and the tire/rims just pile up after a while on old dairy farms.