John Deere 260 skidloader hydraulics

   / John Deere 260 skidloader hydraulics #1  

yanmars

Veteran Member
Joined
Nov 29, 2009
Messages
1,063
I am posting this in several JD sites here for assistance. My brother has a 260 skidloader and was told it has high and low flow hydraulics. He needs high flow, is there a lever to change/adjust the same? Thanks
 
   / John Deere 260 skidloader hydraulics #2  
No lever, if it is truly a high flow machine there will be 5 coupler tips on the unit. Two of them will be std size, two of them will be very large and the last will be a small coupler used as a case drain that many high flow att require. If the machine only has two of the std sized couplers it is not a high flow unit. std flow rate 21 gpm, high flow 33 gpm, the intended att must also have a high flow rated motor to utilize the higher rate.
 
   / John Deere 260 skidloader hydraulics #3  
Oops, also should have stated there is a rocker switch on the console as well for the high flow function if it exists. Would be second switch out to the left of the instrament panel.
 
   / John Deere 260 skidloader hydraulics
  • Thread Starter
#4  
Oops, also should have stated there is a rocker switch on the console as well for the high flow function if it exists. Would be second switch out to the left of the instrament panel.

Thanks
 

Tractor & Equipment Auctions

2023 Ford Explorer AWD SUV (A51694)
2023 Ford Explorer...
2013 INTERNATIONAL WORKSTAR 7600 SBA 6X4 DUMP TRK (A51406)
2013 INTERNATIONAL...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
JOHN DEERE 8R 280 (A53084)
JOHN DEERE 8R 280...
2019 D&P WELDING  12FT LUBE TRAILER (A52472)
2019 D&P WELDING...
MI-T-M PRESSURE WASHER (A52472)
MI-T-M PRESSURE...
 
Top