John Deere 260 skidloader hydraulics

   / John Deere 260 skidloader hydraulics #1  

yanmars

Veteran Member
Joined
Nov 29, 2009
Messages
1,063
I am posting this in several JD sites here for assistance. My brother has a 260 skidloader and was told it has high and low flow hydraulics. He needs high flow, is there a lever to change/adjust the same? Thanks
 
   / John Deere 260 skidloader hydraulics #2  
No lever, if it is truly a high flow machine there will be 5 coupler tips on the unit. Two of them will be std size, two of them will be very large and the last will be a small coupler used as a case drain that many high flow att require. If the machine only has two of the std sized couplers it is not a high flow unit. std flow rate 21 gpm, high flow 33 gpm, the intended att must also have a high flow rated motor to utilize the higher rate.
 
   / John Deere 260 skidloader hydraulics #3  
Oops, also should have stated there is a rocker switch on the console as well for the high flow function if it exists. Would be second switch out to the left of the instrament panel.
 
   / John Deere 260 skidloader hydraulics
  • Thread Starter
#4  
Oops, also should have stated there is a rocker switch on the console as well for the high flow function if it exists. Would be second switch out to the left of the instrament panel.

Thanks
 

Tractor & Equipment Auctions

2011 International WorkStar 7400 Chassis Truck, VIN # 1HTWGAAR6BJ325793 (A51572)
2011 International...
2019 Isuzu NPR-HD 24ft. Box Truck (A50323)
2019 Isuzu NPR-HD...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2005 GMC Sierra Pickup Truck, VIN # 2GTEK13T851399344 (A51572)
2005 GMC Sierra...
2011 Ford F-350 Knapheide Service Truck (A51692)
2011 Ford F-350...
 
Top