Jinma 254 slow turnover

/ Jinma 254 slow turnover #41  
RAy,
There are two places for the leak to happen, if it is the rear seal, the oil will be coming from inside the bellhousing. If it is the gasket between the bellhousing and the engine block, the oil will be leaking from just in front of the bellhousing.

The bad news is to properly fix either will require the tractor be split, flywheel be removed and if necessary remove the bellhousing and repair the gasket/and or seal...

It is really not as bad as it sounds if you have a couple floor jacks some jack stands and maybe an engine hoist...
 

Marketplace Items

2019 GENIE GS-1930 ELECTRIC SCISSOR LIFT (A62129)
2019 GENIE GS-1930...
2023 Global Trailers GT302 30ft. 60YD T/A End Dump Trailer (A61568)
2023 Global...
MARATHON 20KW GENERATOR (A58214)
MARATHON 20KW...
2014 PETERBILT 384 TANDEM AXLE CDL REQUIRED WRECKER (A59575)
2014 PETERBILT 384...
New/Unused 2in Ratchet Strap (A61166)
New/Unused 2in...
HYUNDAI HL955 WHEEL LOADER (A62129)
HYUNDAI HL955...
 
Top