Planters JD Planter Question

/ JD Planter Question #1  

TNhobbyfarmer

Veteran Member
Joined
Dec 23, 2004
Messages
1,185
Location
Middle Tennessee
Tractor
Kubota L3430 Polaris Ranger 500
I bought an old JD 246/247 planter. It's in pretty rough shape and I'm doing some rebuilding and refurbishing. The chutes in which the fertilizer flows through to the ground are metal spiral cylinders. Both are rusted beyond repair. I have seen some rebuilt planters that have plastic tubes that replace the metal ones. Are those available through JD? Are they possibly aftermarket replacements? If so, any ideas about where they can be found? Any ideas/suggestions are appreciated.
 
/ JD Planter Question
  • Thread Starter
#4  
kensfarm.........Shoup carries some aftermarket plastic ones, not too expensive, about $6.50 each. I assumed they were the answer, but after looking at the way they need to attach at the bottom, I'm not sure. Go over to ytmag.com and read a similar post in the implement alley forum to the one I posted here. There were some answers and suggestions that might be helpful.
 
 

Marketplace Items

Land honor Mini Skid Steer (A60352)
Land honor Mini...
Yamaha SX190 Boat with S/A Trailer (A61569)
Yamaha SX190 Boat...
24in Digging Tooth Bucket Excavator Attachment (A60352)
24in Digging Tooth...
UNUSED ATS EPC40 ELEC.PLASMA CUTTER (A62131)
UNUSED ATS EPC40...
2005 Ford Explorer XLT 4x4 (A62613)
2005 Ford Explorer...
ATSpower ATS-PC90 Heavy Duty Plate Compactor (A60353)
ATSpower ATS-PC90...
 
Top