dmrp6510
Bronze Member
My dad is having a hard time getting into the cab does anybody make a second step for that tractor or a solution. We don't use any mid mount attachments.
Thanks
Thanks
JD 4520 Cab Step
- Thread starter dmrp6510
- Start date
- Views: 1812
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,563
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Is this the step you have now? (removed pic as it was the ag 4520, not the CUT)
If so, seems bolting on two straps to each side, and a bar across the bottom would add an additional 3rd step.
If so, seems bolting on two straps to each side, and a bar across the bottom would add an additional 3rd step.
Last edited:
OP
dmrp6510
Bronze Member
No it's a single step 2012 cab model
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,563
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Ok
Didn't know it was the compact utility 4520, rather than the larger ag tractor. Sorry.
I now see the single step. But you may still be able to add straps on each side that extend to a step. In fact, look at the step for the non-cab 4520 CUT in jdparts, and maybe just buy the parts and bolt them on. Parts #11 and #13 in attachment.
A pic of what you have now would be helpful to assist in a better design.
Didn't know it was the compact utility 4520, rather than the larger ag tractor. Sorry.
I now see the single step. But you may still be able to add straps on each side that extend to a step. In fact, look at the step for the non-cab 4520 CUT in jdparts, and maybe just buy the parts and bolt them on. Parts #11 and #13 in attachment.
A pic of what you have now would be helpful to assist in a better design.
