JD 4320 sub compact

[JYD]

I need help
Was brush hogging and a large branch hit one of the hydraulic lines shouting off tractor. I removed the branch but now will not start. A tiny. Bit of fuild escaped

Turns over but no start. I’m in the middle of no were

Any suggestions??? I will go to dealer tomorrow

Help

 

[Roadworthy]

I would carefully go over (and under) the tractor to see what else may have been hit. You do not say whether the tractor will crank but not start or will not even turn over. If it's the latter you may not be satisfying one of the safeties. Did you perhaps leave your PTO engaged?

 

[K5lwq]

Hydraulic line will not keep the tractor from starting. I would look closely at the wire on the fuel solenoid. Could have pulled off.

 

[K5lwq]

I would carefully go over (and under) the tractor to see what else may have been hit. You do not say whether the tractor will crank but not start or will not even turn over. If it's the latter you may not be satisfying one of the safeties. Did you perhaps leave your PTO engaged?

He said turns over but no start. Tells me it is not a safety switch. Must be fuel related.

 

[JYD]

It cranks. Turns and turns. Did turn off pto

 

[JYD]

 

[JYD]

Branch hit middle hose

 

[K5lwq]

Look beyond the hoses. I see the lift pump in the picture. Follow those fuel lines to the injector pump. Look for wires pulled apart. The branch hit in the right area to pull something.

 

[JYD]

Look beyond the hoses. I see the lift pump in the picture. Follow those fuel lines to the injector pump. Look for wires pulled apart. The branch hit in the right area to pull something.

Thanks I’ll look at in am

 

[Deere Dude]

On a JD 3720. had 2 wires pulled apart under the tractor from driving over some bushes. Twice. Look carefully underneath.