JD 3032E questions

[JANDG]

Simply lift seat forward, unplug female plug directly under seat insert 1/4" spade jump wire & lower seat. Or one can install an eaither /or DPDT switch for pennies. Or just close the circuit permantly for about 0 $ This all of course is fantasy & advise no one to try the above at home..*s*

Joe

 

[RoyJackson]

Simply lift seat forward, unplug female plug directly under seat insert 1/4" spade jump wire & lower seat. Or one can install an eaither /or DPDT switch for pennies. Or just close the circuit permantly for about 0 $ This all of course is fantasy & advise no one to try the above at home..*s*

Joe

Yep, and you'd immediately void your warranty...
I've read of guys who put a 50 or 100 lb bag of sand on the seat to do the same. Just can't understand why Deere would sell the thing without offseat capability.
I take it the *s* is supposed to be

 

[kennyd]

Sure the 3032e have that provision. I wouldn't have a tractor that I couldn't get off the seat while running..*s*
Joe

Simply lift seat forward, unplug female plug directly under seat insert 1/4" spade jump wire & lower seat. Or one can install an eaither /or DPDT switch for pennies. Or just close the circuit permantly for about 0 $ This all of course is fantasy & advise no one to try the above at home..*s*

Joe

So Roy was 100% correct. You modified the tractor by disabling the seat switch...

On other models there is a "provision" to operate the PTO without bypassing or modifying safety devices. On my 4110, you get off the tractor-lift the seat and then pull the seat switch UP to use the PTO off-seat.