JD 2010 PTO

   / JD 2010 PTO #1  

gpike19

New member
Joined
Jun 25, 2013
Messages
18
Location
romulus, mi
Tractor
john deere 2010
I have a 1961 jd 2010 (gas) this tractor was used exclusively at several nurseries. at some point in time there was a front loader added to the tractor. to get to the point here, the pto and 3 point were rarely if ever used. I am now looking to buy a new bush hog, pto driven. my question is how can I tell if the pto is still operating normally, other than just watching it rotate? are there seals that might leak? or bearings that might have failed at some point? I don"t want to invest in the bush hog, just to find out the pto no longer functions. I am new to owning a tractor. any help here would be appreciated. thanks
 
   / JD 2010 PTO #2  
With engine running engage pto to see if shaft turns and no load noises are emitted. It's normal for 2010 pto to make a gear clashing noise when clutch is being engaged.
 
   / JD 2010 PTO
  • Thread Starter
#3  
hello tx Jim thanks for the reply. yes I engaged pto and shaft turns smoothly with very little noise. seems to be ok.
 

Tractor & Equipment Auctions

2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
Takeuchi Skid Steer (A49461)
Takeuchi Skid...
2007 Ford Ranger Pickup Truck (A50323)
2007 Ford Ranger...
2016 E-Z Beever M12R Towable Brush Chipper (A51691)
2016 E-Z Beever...
2017 FORD F-650 FLATBED DUALLY (A52472)
2017 FORD F-650...
6 STEEL KENWORTH T800 BUMPERS (A52472)
6 STEEL KENWORTH...
 
Top