JD 175 Farm Loader

[JoshB]

Would your software be able to tell you what the thread size is on the fitting (#17 on the diagram)?

The flex line will probably come with male/male ends. I'll probably have to pickup some unions to make it all work. Maybe remove the fitting from the regulator (#19) and flex hose straight into that, but then will still need a union to connect to the other flex hose (#16).

Would those be 3/4" fittings?

 

[sisupower]

I'll check once I get back in. I'm testing a tractor right now. Ill get back to you in a second buddy

 

[JoshB]

No rush. Thank you

 

[Tx Jim]

Josh
Have you considered welding or brazing your old line? Back when I was employed by a JD dealer I've seen many hyd lines repaired by brazing.

 

[JoshB]

The people I bought it from painted green over everything. Under the paint is a good bit of rust. That line is pretty used up. But thank you for the suggestion!

 

[Tx Jim]

Would your software be able to tell you what the thread size is on the fitting (#17 on the diagram)?

The flex line will probably come with male/male ends. I'll probably have to pickup some unions to make it all work. Maybe remove the fitting from the regulator (#19) and flex hose straight into that, but then will still need a union to connect to the other flex hose (#16).

Would those be 3/4" fittings?

Are these the spec's you need?

 

[JoshB]

Yessir!

 

[sisupower]

Beat me too it

 

[JoshB]

Thanks to you both.

 

[sisupower]

No worries