jd 110tlb

[Wrenchin]

i have a jd110 tlb evry time key switch is turned on blows 10amp hydraulic controler fuse .i have checked 90% of hydro connections and back of fuse box. machine will start but dont move ,fuse also blows when key is in aux position tryed new switch same thing

 

[jenkinsph]

I would check for a shorted wire with a vom. If you can check with the hydraulic controller unplugged you might be able to determine whether the controller has bad coils or if the wiring is the culprit. You need to know everything that is connected to this circuit which can be a problem, take the time to go over the service manual to help with this.

 

[Wrenchin]

thanks for the help

 

[disney]

Did you ever find the cause of the problem?