Iseki TS3510 Front Loader

[Miky275]

Hi folks. Ive just acquired an iseki ts3510. An I'm hoping I can fit a front. Loader to it. Has any one done this before. As I'm thinking it may have to be a home built loader as serching the internet not a lot comes up. Would I tap in to the hydraulic lines running from the pump to the 3 point hitch for the loader controls..

Regards.

Miky.

 

[yomax4]

There are a few places in the USA. I bought one for my Iseki and they had 4-5 sizes. No help for ya where you are. Good Luck..

 

[lens12]

Yes . yYou would put the loader control in series with the 3point. I don't know of any one that made a mounting kit for the 3510. there might be a kit for the closest White/Oliver model.

 

[freedomlives]

It can be done-- I have a TS35F, which is a licensed copy of the 3510 built by TYM in the 90s, and the Polish firm that imported it mounted a front end loader. But was a custom job-- they make their own FELs actually. I can send you photos later of all the mounting and such.

 

[Miky275]

Hi that would be great. If possible pictures of how the hydraulics are tied in. An how the loader is mounted. Sorry for the late reply as just moves house so had no Internet.

 

[freedomlives]

Hi,

Just noticed your post. I'll take better photos soon, just went through ones I have as its night right now. Feel free to PM me Monday morning to remind me.

Frontend loader on Iseki 35 - Google Photos

What I have was made by TYM under license from ISEKI in the 90s. Mechanically it appears all the same as the TS3510 (except for having 4wd) but the body panels are more of a 90s instead of 80s look.

Hydraulics for my loader are tapped in right after the pump, and then it continues to the power steering and 3pt lift.

 

[freedomlives]

Added more pics to above album. As can be seen, there are some places on mine that the FEL bolts on to. I could also get you the contact for the Polish company that made mine.