Is there a cable bury attachment?
- Thread starter Rob 80
- Start date
- Views: 28447
Sprinklerman
Platinum Member
get a single tine ripper , weld a piece of steel pipe along the back , slip the wire thru the pipe .
Or buy a vermeer lm42 , or a ditch witch 410
Or buy a vermeer lm42 , or a ditch witch 410
sea2summit
Elite Member
CCWKen
Veteran Member
- Joined
- Mar 22, 2005
- Messages
- 1,173
- Location
- South Texas, USA
- Tractor
- Ford-3910, JD-420C, Kenbota-Custom, IH-2606
The 3-pt attachment you want is called a single tine ripper or Subsoiler. The accessory linked above attaches to the Subsoiler for feeding wire or plastic tubing into the cut as you go. You'll also need some type of spool/reel holder. When it's all said and done, it may be cheaper to rent a Ditch Witch if this is a one-time use.
bindian
Super Member
Buy a large diameter PVC pipe or conduit 90 degree elbow and wire it to your subsoiler. 5 or 6 dollars.
hugs, Brandi
GregP27
Bronze Member
It's called a subsoiler. Look it up on Google videos.
kennyd
Advertiser
See if the google search of TBN works: Search Results | Compact tractor forums, news, reviews, information.
There are quite a few threads on these, with some great pics and ideas on homemade ones. Mine was just a simple ripper shank and a piece of 1" pvc conduit.
There are quite a few threads on these, with some great pics and ideas on homemade ones. Mine was just a simple ripper shank and a piece of 1" pvc conduit.
airbiscuit
Super Member
- Joined
- Aug 28, 2004
- Messages
- 6,522
- Location
- NW Wisconsin
- Tractor
- New Holland T2310 (40hp), Kubota L3010 GST, New Holland TC21DA *** Previously - Farmall H, 1941 John Deere B, Shibaura SD1500, John Deere 850, Bobcat 642, New Holland 1925
Whatever you use, I would add a gage wheel to prevent it from going too deep. Yo don't want to snag buried fiber optic or ???
Fallon
Super Member
Personally I just got a 3pt trencher. 3' deep & 6" wide. Got a killer deal on it & have several projects for it myself & so do a few friends. Will likely get sold after that. I know a lot of others put basically an elbow on the back of a subsoiler & use that, basically the same thing as the agri-supply link earlier.
Be very careful about burying Ethernet. You can get ground loop issues between different buildings. Commercially people never run copper, they only run fiber between buildings because of this. I did run conduit & put Ethernet in it out to my chicken coop & up to my shop when we did a different trenching project. I'm a huge believer in putting in conduit rather than wire of any sort. That way you can replace, repair or upgrade it as needed without having to trench again. Some areas have huge issues with critters eating small cable that gets buried.
Be very careful about burying Ethernet. You can get ground loop issues between different buildings. Commercially people never run copper, they only run fiber between buildings because of this. I did run conduit & put Ethernet in it out to my chicken coop & up to my shop when we did a different trenching project. I'm a huge believer in putting in conduit rather than wire of any sort. That way you can replace, repair or upgrade it as needed without having to trench again. Some areas have huge issues with critters eating small cable that gets buried.
