International 140
- Thread starter Crw
- Start date
- Views: 1700
AKwelder
Silver Member
- Joined
- Sep 24, 2008
- Messages
- 224
- Location
- Fairbanks Alaska
- Tractor
- Kubota B8200, 1953 International "Super C"
i have heard of people doing it, try going to redpower.com. They breath red iron. you will love it
DJ54
Elite Member
- Joined
- Jan 20, 2009
- Messages
- 4,579
- Location
- Carroll, Ohio
- Tractor
- IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans
Not a 140, but it's older brother, an "A". Great little tractors in the garden. mine pulls a single 16" bottom, and pulls a 6' pull type disc with ease.
If the implements aren't Fast Hitch, it may take a bit to hook them up. If it is Fast Hitch, quick and simple hookup.
That's what they were built and designed for, bit on a larger scale for small truck patch farms. Still many being used today for that, and cultivating tobacco in KY.
If the implements aren't Fast Hitch, it may take a bit to hook them up. If it is Fast Hitch, quick and simple hookup.
That's what they were built and designed for, bit on a larger scale for small truck patch farms. Still many being used today for that, and cultivating tobacco in KY.
Turbys_1700
Elite Member
I was raised up on a Super A and later we had a 140. The Super A had a Super C kit put in the motor to increase power. Nice clean Super A's and 140's are very desirable tractors around here in NC for people wanting a garden tractor. We used ours mostly to cultivate and pull a bar rake for haying. Very dependable.
jfay
Silver Member
A 140 is a great small farm tractor. Mine will pull 2-14 plow although it can bog down in heavy soil. A double 12" or single 16" is no problem. I have converted mine to a 3 point hitch and pull a 7'6" disk. Good luck.
