Info on Hydraulic Top Link needed

[ovrszd]

Here's a link to a thread on the one I built for my M9540.

http://www.tractorbynet.com/forums/hydraulics/273331-hydraulic-top-link-homemade.html?highlight=


Here's a link to a thread on a Tilt link I built for my M9540

http://www.tractorbynet.com/forums/hydraulics/276490-hydraulic-tilt-link-homemade.html?highlight=

 

[Turkeytrack]

Fair enough. I only had one tractor to deal with when making mine.

This post shows how mine turned out http://www.tractorbynet.com/forums/...mx5100-3-remotes-under-500-a.html#post4517053

Those look good, I will have to add another remote before I need a tilt cylinder. I don't know why buy the tractor with 2,(or 3) , remotes. I bought it new and that is what they had on the lot.It was winter and my wife was wanting a cab tractor. She had been feeding round bales with an open top 5000 Ford for 16 years.I work international , a 28 day rotation , so she feeds at least 1/2 time

 

[Turkeytrack]

Here's a link to a thread on the one I built for my M9540.

http://www.tractorbynet.com/forums/hydraulics/273331-hydraulic-top-link-homemade.html?highlight=


Here's a link to a thread on a Tilt link I built for my M9540

http://www.tractorbynet.com/forums/hydraulics/276490-hydraulic-tilt-link-homemade.html?highlight=

I saw that Ovrszd, They look good. In fact I had not joined the form when your photos. I creeped around for years using ya'll's ideas

 

[ovrszd]

I saw that Ovrszd, They look good. In fact I had not joined the form when your photos. I creeped around for years using ya'll's ideas

Steal all you want. I've been doing it for years on here!!!

I have 3 rear remotes on my M9540. Have 2 on my little Ford. Use them all.

 

[LD1]

I put three remotes on mine, but only a use for two right now. .......An angle cylinder on the rear blade (or a new blade all together) is in the works.