Info needed on Iseki TS2510 hydralics

   / Info needed on Iseki TS2510 hydralics #1  

Daddyd

New member
Joined
Oct 18, 2012
Messages
3
Location
Riverview, FL
Tractor
Iseki TS2510
Lifting speed is way too fast, a slight movement of the up lever sends the implement jerking up too fast. I have changed hydrualic fluid and cleaned suction line screen, made no difference. Also, is there an adjustment for the lifting speed control? Thanks, Daddyd
 
   / Info needed on Iseki TS2510 hydralics
  • Thread Starter
#3  
Thanks Marcel I'll look for the T handle.
 
   / Info needed on Iseki TS2510 hydralics #4  
The T handle usually changes the down speed, but not the lift speed, but thats a good suggestion. I know that on some Iseki's there is also a knob below your behind your knees when you sit down, and that will control the lift speed. It's tough when it is all in Japanese. You may just have to play with some of the knobs.
 
   / Info needed on Iseki TS2510 hydralics #5  
Usually the problem is too slow a lift. You can put a restricter valve in the line. Email me if you can't find one.
 
   / Info needed on Iseki TS2510 hydralics
  • Thread Starter
#6  
Thanks Mitch & Leonard for your replys,I'll let you know what happens when i find time to work on my tractor, maybe this week;

Tim
 

Tractor & Equipment Auctions

2012 SULLIVAN PALATEK AIR COMPRESSOR (A51222)
2012 SULLIVAN...
2019 VOLVO VNL HIGH ROOF SLEEPER (A50046)
2019 VOLVO VNL...
Craftsman T1800 42in. Riding Mower (A49346)
Craftsman T1800...
2018 Ram 3500 Bucket Truck with Duralift DTS29 - 34FT Walk-In Bucket, HEMI Gas, 98K Miles (A51039)
2018 Ram 3500...
KODIAK 10' HD ROTARY MOWER (A51406)
KODIAK 10' HD...
8 DRILL COLLAR (A50854)
8 DRILL COLLAR...
 
Top