Info needed on Iseki TS2510 hydralics

   / Info needed on Iseki TS2510 hydralics #1  

Daddyd

New member
Joined
Oct 18, 2012
Messages
3
Location
Riverview, FL
Tractor
Iseki TS2510
Lifting speed is way too fast, a slight movement of the up lever sends the implement jerking up too fast. I have changed hydrualic fluid and cleaned suction line screen, made no difference. Also, is there an adjustment for the lifting speed control? Thanks, Daddyd
 
   / Info needed on Iseki TS2510 hydralics
  • Thread Starter
#3  
Thanks Marcel I'll look for the T handle.
 
   / Info needed on Iseki TS2510 hydralics #4  
The T handle usually changes the down speed, but not the lift speed, but thats a good suggestion. I know that on some Iseki's there is also a knob below your behind your knees when you sit down, and that will control the lift speed. It's tough when it is all in Japanese. You may just have to play with some of the knobs.
 
   / Info needed on Iseki TS2510 hydralics #5  
Usually the problem is too slow a lift. You can put a restricter valve in the line. Email me if you can't find one.
 
   / Info needed on Iseki TS2510 hydralics
  • Thread Starter
#6  
Thanks Mitch & Leonard for your replys,I'll let you know what happens when i find time to work on my tractor, maybe this week;

Tim
 

Tractor & Equipment Auctions

2000 FORD F450 SUPER DUTY SINGLE CAB FLATBED TRUCK (A51406)
2000 FORD F450...
2019 Allmand Night-Lite V-Series S/A Towable Light Tower (A49461)
2019 Allmand...
30ft Pole S/A Towable Trailer (A49346)
30ft Pole S/A...
2012 KENWORTH T800 (A50854)
2012 KENWORTH T800...
2018 CATERPILLAR 299D2 SKID STEER (A51242)
2018 CATERPILLAR...
2006 MACK CV713 KILL TRUCK (A50854)
2006 MACK CV713...
 
Top