Implement storage

   / Implement storage #22  
</font><font color="blue" class="small">( do you call that rain? )</font>


As the song says: "It never rains in southern California! It pours, man, it pours!!"! /forums/images/graemlins/cool.gif
 
   / Implement storage #23  
</font><font color="blue" class="small">( Morton Buildings Inc is a nationwide company with 123 Construction Centers and 7 Manufacturing Plants in 35 states that has been building superior quality 'pole barns' at reasonable prices for 102 years! )</font>



They just added my building to their DESIGN SPOTLIGHT !!
 
   / Implement storage #24  
I'm in the "leave 'em out in the yard to fend for themselves" camp. Rubber, plastic, etc parts get covered in the 100° summers though. Paint fading and rain are of no concern to me. I do put them on junk plywood to make sliding them into position when hooking up easier. When the backhoe's off it gets covered with a tarp ... but I have no logical reason for doing so. Baby usually stays under some cover when not in use.
 
   / Implement storage #25  
Just to share some info on this, I built 4 storage pallets on wheels for my attachments...I roll the pallet out from under one of the shelves in my shed, drop the attachment on it and then just roll it back under the shed shelf. Each pallet fits the attachement and it only took a few hours to build all 4. The only thing I had to do in the shed was to adapt my shelves and hang the support for them from the ceiling instead of the floor to be able to slide the pallets underneath. I kept wondering what to do since my shed is not too big(12x16) and I didn't feel like adding on or building shelves that I may break with the hydraulics. I used some 2x4s, wheels, and old plywood. Got one for the plow, bucket, hoe, and forks (mower is already on wheels) This works really good for me so far. Good luck.
 
   / Implement storage
  • Thread Starter
#26  
This sounds good. Can we get a picture.

Bob Rip
 
   / Implement storage #27  
</font><font color="blue" class="small">(
That's one of the reasons that I built the 30 x 38 Morton Building.

Morton.jpg


Shhhh!! My wife thinks that it was so that she could park her car in the garage!!
Wink.jpg


AAA_smiley__.jpg


)</font>

If you don't mind my asking, what was the cost on something like this?

Sincerely,

Rob /forums/images/graemlins/smile.gif
 
   / Implement storage #28  
I'm currently building an addition on my shed for my PT.
DSC00395.jpg


DSC00401.jpg

Fits great!
 
   / Implement storage
  • Thread Starter
#29  
Very nice. Would you care to tell us about what this cost. I am seriously considering a building about that size.

Bob Rip
 
   / Implement storage #30  
This shot is from the lower half of a two story shed I put up last year. The lower half is used for my 425 and storage of 12 attachments. The upper half is my wifes potting area.
PJ
 

Attachments

  • 696671-MVC-803F.JPG
    696671-MVC-803F.JPG
    50.9 KB · Views: 356

Tractor & Equipment Auctions

LayMor Sweepmaster 300 8HC (A55314)
LayMor Sweepmaster...
Honda EM3800SX Portable Gasoline Generator (A55851)
Honda EM3800SX...
UNUSED FUTURE PAIR OF 7" MINI RUBBER TRACKS (A57193)
UNUSED FUTURE PAIR...
2011 Ford Escape XLT SUV (A55853)
2011 Ford Escape...
2020 FREIGHTLINER CASCADIA TANDEM AXLE SLEEPER TRUCK (A57880)
2020 FREIGHTLINER...
2005 Toyota Highlander SUV (A55853)
2005 Toyota...
 
Top