Implement falling off SSQA

   / Implement falling off SSQA #1  

6sunset6

Veteran Member
Joined
May 6, 2007
Messages
1,055
Location
SE NY
Tractor
NH TC34DA 34HP HST, 2 rear remotes, front diverter, loaded R4's
My tractor NH TC34DA is 10 years old . It was new and came with a NH SSQA. The last couple of years when I roll the bucket all the way forward it fell off sometimes. I roll it that way because I have a grab arm that closes over the bucket. If I want to grab something big I have to roll the bucket so the grab arm closes around the object against the bucket. I though the pins on the SSQA were getting worn so I added some material by welding. Did not seem to help much. Anybody else have this problem? I could buy new pins they are around $40 each. But if it does not fix it I will not be happy. I never liked that SSQA . I like the ATI ones . I had one of those on another tractor. Any thoughts ?
 
   / Implement falling off SSQA #2  
How tight of fit are the pins fitting in the bucket.
To tight the pins can't go down all the way, to loose and the pins can be pushed up/out.
If set/working correctly the bucket on a SSQA will not come off.
 
   / Implement falling off SSQA
  • Thread Starter
#4  
thanks read thru the whole thing. I was thinking of new pins. I think they could be an inch longer and still lift clear.
 
   / Implement falling off SSQA
  • Thread Starter
#5  
thanks read thru the whole thing. I was thinking of new pins. I think they could be an inch longer and still lift clear.

I got new pins new PN replaced old no. An inch longer . I would guess I was not the only one with the problem.
 
 

Tractor & Equipment Auctions

2008 Freightliner B2 School Bus (A51692)
2008 Freightliner...
GS-3246 MAN LIFT (A52472)
GS-3246 MAN LIFT...
2022 Case IH Steiger 470HD AFS Connect RowTrac 4WD Tractor (A50657)
2022 Case IH...
1973 CATERPILLAR 988 LOADER (A52576)
1973 CATERPILLAR...
2018 E-Z Beever M12R Towable Brush Chipper (A51691)
2018 E-Z Beever...
Two Post Car Lift (A50120)
Two Post Car Lift...
 
Top