Hydrolics
- Thread starter Scspikes
- Start date
- Views: 1121
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
help us help you.. any backstory on this?
is it a mechanical problem like a bend cyl rod or damaged loader frame that physically won't let it lower?
if not that, have you tried running hte spool thru range of motion with engine off and letting it exhaust?
Have you thrown a towel over the line fromt he spool to the lift cyls and then cracked the connector with a wrench to see if it starts leaking and lowering the loader?
tell us what you have, and what you have already done.
pics help.
is it a mechanical problem like a bend cyl rod or damaged loader frame that physically won't let it lower?
if not that, have you tried running hte spool thru range of motion with engine off and letting it exhaust?
Have you thrown a towel over the line fromt he spool to the lift cyls and then cracked the connector with a wrench to see if it starts leaking and lowering the loader?
tell us what you have, and what you have already done.
pics help.
Leejohn
Elite Member
With so little info start here, take the cover off at the of spool and see if anything is broken or came loose. With cover off the spool should move easy.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
so.. it won't lower because the spool won't move???
investigate the spool!
investigate the spool!
DLTTrekkers
Veteran Member
Won t move because sistemefilter orifis is blocked . THAT IS THE VERY LITTLE FILTER IN THE MIDDLE OF THE FRONTHOUSING .
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
It could be stuck due to mechanical issue.
If the spool can not move, then the loader should not move.
If the return hose is blocked, the loader will not lower.
Another valve might be causing some back pressure.
Check the position of the 3pt lever . It should be in neutral.
Does your valve have a lock position.
Reset your QD's if you have them
