Hydraulics qustion
- Thread starter CK732
- Start date
- Views: 1037
-
- Tags
- hydraulics
oldnslo
Super Member
On what??
duffer
Veteran Member
Assuming you're wanting to add them to your tractor, you need to look at your hydraulic valve assembly to see if you have a "power beyond" port, as well as a output and backflow port for the additional lines. If not, you'll need to replace (or possibly add) another valve body in order to operate add't'l ports effectively.
You can't just go and add a "T" to an existing line like you can for adding a water line to your house.
You can't just go and add a "T" to an existing line like you can for adding a water line to your house.
agjones
Platinum Member
- Joined
- May 4, 2010
- Messages
- 619
- Location
- Jessup Mill, NC
- Tractor
- Rk55HC, Kubota kx040, power-trac 425d, Bobcat L23, Yanmar 401w, bx1880, IHI 30 and Fiori D40 dumpers, Magnatrac mh5000, Dew-eze ATM72LC Slope Mower, Terramite t6 4wd, DR Power brush mower
Summit hydraulics has good info on this. I've had good experience with both their products and presales support.
sequoyah101
Silver Member
- Joined
- Nov 13, 2009
- Messages
- 163
- Location
- East Central Oklahoma
- Tractor
- CaseIH 50A, CaseIH JX95, CaseIH JX80, Case 321F, Case CX90, Allis 190XT, Daewoo DD80L Dozer, Schaeff SKL831 Loader, Komatsu PC40-7 Trackhoe, JCB 210S TLB, JD750, JD820, Kubota FR3680, Kioti Mechron
Not hard if you know what you are doing and have the ports on the tractor. One of mine needed a power beyond spool and the other was a CaseIH kit that just bolted on. One was cheap and the other about $650. Guess which one.
