Hydraulics question

[Ppm]

I have a 4410 / 435 loader / 48 backhoe / and one rear remote......

I would like to purchase a root grapple and a T n T for use with my box blade... In doing some research here, is adding another rear remote for the T n T and a diverter set up at the loader for the grapple my best choice? Can anyone offer some direction or maybe advice on a better or a more logical way of doing this. A root grapple is my first planned purchase with the T n T hopefully coming soon after. I thank you in advance for your help.

 

[murphy1244]

maybe your only choice

 

[Zebrafive]

I would run the grapple off the rear remote.
Find out the cost of a second rear SCV vs a diverter hooked up on your one rear SCV for T&T

 

[AKfish]

I have a 4410 / 435 loader / 48 backhoe / and one rear remote......

In doing some research here, is adding another rear remote for the T n T and a diverter set up at the loader for the grapple my best choice? Can anyone offer some direction or maybe advice on a better or a more logical way of doing this. A root grapple is my first planned purchase with the T n T hopefully coming soon after. I thank you in advance for your help.

There is alot on info here on TBN regarding this upgrade. IIRC - your tractor will only support only the 2 mid-mount SCV's and the optional 3rd rear mount SCV. In order for you to provide more SCV's would be to go with your stated course; i.e. electric diverter or the second optional course - plumbing in additional SCV's from a power beyond circuit.

The hydro-electric diverter option is the cleaner solution - IMO.

AKfish