Hydraulic
- Thread starter tensaw12
- Start date
- Views: 1595
JerryG
Super Member
I haven't heard of anyone with a leak in that specific place. Most of the time, it will just be a loose fitting. A wrench and a couple of minutes normally takes care of the problem on a new tractor.
wushaw
Elite Member
I had that problem on a B7500 Kubota that I previously owned, it turned out that a QD fitting was not tight enough on a line. I had two other very obvious (busted flexible FEL hoses) hydraulic leaks in the next three years of ownership.
I have had two hydraulic leaks on my L2800.. one on a FEL hose fitting (loose) and the other on my BH75 (backhoe) and it also was a loose fitting.
Hydraulic leaks are going to happen from time to time.
I have had two hydraulic leaks on my L2800.. one on a FEL hose fitting (loose) and the other on my BH75 (backhoe) and it also was a loose fitting.
Hydraulic leaks are going to happen from time to time.
aesanders
Platinum Member
- Joined
- Aug 12, 2005
- Messages
- 987
- Location
- Alachua County, Florida
- Tractor
- LS MT3 42 S HST cab, BCS 830 2 wheel tractor, Gravely Pro-Turn 160 XDZ, John Deere Gator HPX 615e
My new John Deere 2320 developed a severe hydraulic leak at 7 hours. Dealer took care of it under warranty although it was probably my fault it happened. It can happen to all brands of tractors at anytime interval. My tractor is working well now.
