Lakespirit1954
New member
Someone please tell me how to pick correct length of this for my TYM T451, and what size hyd fittings I need.
HYDRAULIC TOP LINK LENGTH
- Thread starter Lakespirit1954
- Start date
- Views: 11576
i7win7
Veteran Member
Measure your current top link both retracted and extended. Try to find cylinder that comes closest to these measurements. Cat 1 top link pins are 3/4". Fittings and hose lengths depend on what cylinder and hydraulic couplers need. Since you want to be able to make small adjustments 1/4" hoses or a flow restrictor may be desired.
I have a B2650 and selected this for my toplink
I have a B2650 and selected this for my toplink
MtnViewRanch
Elite Member, Advertiser
- Joined
- Mar 19, 2005
- Messages
- 10,644
- Tractor
- Mahindra 7520, Mahindra 3215HST, Case 580 extendahoe, Case 310 dozer, Parsons trencher, Cat D6,
Look at this link, get the dimension and try to get the hydraulic top link with that dimension at half extension.
As far as couplers, you need 1/2" male poppet type ISO 5675 to plug into your factory rear remote couplers.
I recommend that you go with 3/8" hose.
Last edited:
old and tired
Veteran Member
Also, if you plan to get Pat's or another 3ph quick hitch, that will add another 4". Not sure if you have them or plan to buy them in the future.
i7win7
Veteran Member
QH won't require longer toplink, longer pto shaft maybe
Texasmark
Elite Member
- Joined
- Apr 24, 2012
- Messages
- 3,703
- Location
- N. Texas
- Tractor
- Ford: '88 3910 Series II, '80 3600, '65 3000; '07 6530C Branson with FEL, 2020 LS MT225S. Case-IH 395 and 895 with cab. All Diesels
4"? I have Cat I and II...haven't measured the II lately but recently measured the I for a neighbor wanting to install a set and it was a 2" extension....I think the mechanical top links sold by TSC came in 25" standard and 27" for longer versions....memory cloudy here and you needed the longer link for use with the Pats.
old and tired
Veteran Member
Sorry, I was referring to Pat's QA. I wrongly assume the other QA were also, 4".
OP
Lakespirit1954
New member
I ordered a hydraulic top link and waiting for it to arrive.
joeyd
Platinum Member
Where did you order it from? Mt. View Ranch has always been helpful to those inquiring about top links even if they don't order thru him. Did you go thru Jordans?
OP
Lakespirit1954
New member
Spare Parts Holland Hydraulic Top Link Cat. 1-1 with Locking Block 18 1/8" - 26 3/8" with 2 x Hoses through Amazon $253.
Arrived and installed today.
Arrived and installed today.
