Hydraulic side link (tilt) question

   / Hydraulic side link (tilt) question #1  

LS Tractor Owner

Super Member
Joined
May 1, 2017
Messages
7,562
Location
Edgewood, NM
Tractor
LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
If anyone has installed a hydraulic side link on their XG3025 or similar tractor, could you please post a part number or which cylinder that you used? Apparently they are shorter than "stock" type cylinders? I know they have a swivel at the top on the lift arms. Has anyone pieced together one?

Seems like the dealer wants around $200 more than the typical ones from places like Agri-Store. I'm just wondering if I am going to be "stuck" getting one from the dealer.....
 
   / Hydraulic side link (tilt) question #2  
If anyone has installed a hydraulic side link on their XG3025 or similar tractor, could you please post a part number or which cylinder that you used? Apparently they are shorter than "stock" type cylinders? I know they have a swivel at the top on the lift arms. Has anyone pieced together one?

Seems like the dealer wants around $200 more than the typical ones from places like Agri-Store. I'm just wondering if I am going to be "stuck" getting one from the dealer.....

I doubt that you will find an off the shelf unit for your tractor. You can always purchase one from me, but be prepared to wait.

2" dia cylinder with 1 1/4" dia rod with a 4" stroke providing an equal amount of tilt angle to both sides. :thumbsup:

This connects at the lower swivel point of the extending bars at the top side of the link.
 

Attachments

  • IMG_3354.JPG
    IMG_3354.JPG
    140.1 KB · Views: 161
   / Hydraulic side link (tilt) question
  • Thread Starter
#3  
I doubt that you will find an off the shelf unit for your tractor. You can always purchase one from me, but be prepared to wait.

2" dia cylinder with 1 1/4" dia rod with a 4" stroke providing an equal amount of tilt angle to both sides. :thumbsup:

This connects at the lower swivel point of the extending bars at the top side of the link.

I will PM you for a price / wait time, thanks.
 
   / Hydraulic side link (tilt) question #4  
I’ll second Brian’s knowledge and service. Got my TnT from him years ago.
 
   / Hydraulic side link (tilt) question #5  
I got my hydraulic top link from Brian - six years ago. Plug 'n Play to instal. Not a moments problems. Makes all ground engagement implements a joy to use and near 100% effective. Especially thankful now that I've gotten a tad bit older.
 

Tractor & Equipment Auctions

SCAN FOR HAULING AND FINANCING INFORMATION (A51242)
SCAN FOR HAULING...
GARDNER DENVER 480 VOLT AIR COMPRESSOR (A50854)
GARDNER DENVER 480...
2013 Chevrolet Tahoe SUV (A49461)
2013 Chevrolet...
2011 L3 GENERATOR SET (A51222)
2011 L3 GENERATOR...
2021 Kubota SVL97-2HC Compact Track Loader (A50657)
2021 Kubota...
2005 International Pier Drilling Truck (A49461)
2005 International...
 
Top