Hydraulic side link (tilt) question

   / Hydraulic side link (tilt) question #1  

LS Tractor Owner

Super Member
Joined
May 1, 2017
Messages
7,562
Location
Edgewood, NM
Tractor
LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
If anyone has installed a hydraulic side link on their XG3025 or similar tractor, could you please post a part number or which cylinder that you used? Apparently they are shorter than "stock" type cylinders? I know they have a swivel at the top on the lift arms. Has anyone pieced together one?

Seems like the dealer wants around $200 more than the typical ones from places like Agri-Store. I'm just wondering if I am going to be "stuck" getting one from the dealer.....
 
   / Hydraulic side link (tilt) question #2  
If anyone has installed a hydraulic side link on their XG3025 or similar tractor, could you please post a part number or which cylinder that you used? Apparently they are shorter than "stock" type cylinders? I know they have a swivel at the top on the lift arms. Has anyone pieced together one?

Seems like the dealer wants around $200 more than the typical ones from places like Agri-Store. I'm just wondering if I am going to be "stuck" getting one from the dealer.....

I doubt that you will find an off the shelf unit for your tractor. You can always purchase one from me, but be prepared to wait.

2" dia cylinder with 1 1/4" dia rod with a 4" stroke providing an equal amount of tilt angle to both sides. :thumbsup:

This connects at the lower swivel point of the extending bars at the top side of the link.
 

Attachments

  • IMG_3354.JPG
    IMG_3354.JPG
    140.1 KB · Views: 161
   / Hydraulic side link (tilt) question
  • Thread Starter
#3  
I doubt that you will find an off the shelf unit for your tractor. You can always purchase one from me, but be prepared to wait.

2" dia cylinder with 1 1/4" dia rod with a 4" stroke providing an equal amount of tilt angle to both sides. :thumbsup:

This connects at the lower swivel point of the extending bars at the top side of the link.

I will PM you for a price / wait time, thanks.
 
   / Hydraulic side link (tilt) question #4  
I’ll second Brian’s knowledge and service. Got my TnT from him years ago.
 
   / Hydraulic side link (tilt) question #5  
I got my hydraulic top link from Brian - six years ago. Plug 'n Play to instal. Not a moments problems. Makes all ground engagement implements a joy to use and near 100% effective. Especially thankful now that I've gotten a tad bit older.
 

Tractor & Equipment Auctions

2015 MACK GU713 DAYCAB (A50854)
2015 MACK GU713...
2017 terex warrior 1800 screener (A50322)
2017 terex warrior...
2022 ONYX RX34 FLOOR SWEEPER (A50458)
2022 ONYX RX34...
ALL ITEMS NOT PICKED UP IN 30 DAYS WILL BE RESOLD FOR STORAGE!! (A50774)
ALL ITEMS NOT...
2018 John Deere 460E Articulated Dump Truck (A51039)
2018 John Deere...
Unused Delta Crash Attenuators (A49461)
Unused Delta Crash...
 
Top