Hydraulic side link (tilt) question

   / Hydraulic side link (tilt) question #1  

LS Tractor Owner

Super Member
Joined
May 1, 2017
Messages
7,665
Location
Edgewood, NM
Tractor
LS XG3025 TLB, Previously MT125 TLB, Craftsman GTS6500
If anyone has installed a hydraulic side link on their XG3025 or similar tractor, could you please post a part number or which cylinder that you used? Apparently they are shorter than "stock" type cylinders? I know they have a swivel at the top on the lift arms. Has anyone pieced together one?

Seems like the dealer wants around $200 more than the typical ones from places like Agri-Store. I'm just wondering if I am going to be "stuck" getting one from the dealer.....
 
   / Hydraulic side link (tilt) question #2  
If anyone has installed a hydraulic side link on their XG3025 or similar tractor, could you please post a part number or which cylinder that you used? Apparently they are shorter than "stock" type cylinders? I know they have a swivel at the top on the lift arms. Has anyone pieced together one?

Seems like the dealer wants around $200 more than the typical ones from places like Agri-Store. I'm just wondering if I am going to be "stuck" getting one from the dealer.....

I doubt that you will find an off the shelf unit for your tractor. You can always purchase one from me, but be prepared to wait.

2" dia cylinder with 1 1/4" dia rod with a 4" stroke providing an equal amount of tilt angle to both sides. :thumbsup:

This connects at the lower swivel point of the extending bars at the top side of the link.
 

Attachments

  • IMG_3354.JPG
    IMG_3354.JPG
    140.1 KB · Views: 166
   / Hydraulic side link (tilt) question
  • Thread Starter
#3  
I doubt that you will find an off the shelf unit for your tractor. You can always purchase one from me, but be prepared to wait.

2" dia cylinder with 1 1/4" dia rod with a 4" stroke providing an equal amount of tilt angle to both sides. :thumbsup:

This connects at the lower swivel point of the extending bars at the top side of the link.

I will PM you for a price / wait time, thanks.
 
   / Hydraulic side link (tilt) question #4  
I’ll second Brian’s knowledge and service. Got my TnT from him years ago.
 
   / Hydraulic side link (tilt) question #5  
I got my hydraulic top link from Brian - six years ago. Plug 'n Play to instal. Not a moments problems. Makes all ground engagement implements a joy to use and near 100% effective. Especially thankful now that I've gotten a tad bit older.
 

Tractor & Equipment Auctions

30 INCH TOOTHLESS BUCKET FOR MINI EXCAVATOR (A58214)
30 INCH TOOTHLESS...
38" X 53" X 16" FUEL TANK (A58374)
38" X 53" X 16"...
excavator trenching bucket- one bucket per lot (A56435)
excavator...
Air Compressor (New/Unused) (A59225)
Air Compressor...
2015 FREIGHTLINER CASCADIA DAYCAB (A58214)
2015 FREIGHTLINER...
White Metal Roof Panels (A55758)
White Metal Roof...
 
Top